The Coffin Shelf with Drawer! (casket) - Free 3D Print Model

Search models, users, collections, and posts

K VAN

Household>Decor

IP Report

Print Profile(4)

All

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

A1 mini

50% scale 0.16mm layer, 3 walls, 10% infill

Designer

4.8 h

1 plate

5.0(50)

20% scale 0.16mm layer, 3 walls, 10% infill

Designer

44 min

1 plate

4.8(24)

100% scale 0.16mm layer, 4 walls, 10% infill

Designer

24.3 h

3 plates

4.8(17)

0.16mm layer, 4 walls, 10% infill

53.3 h

4 plates

Open in Bambu Studio

Boost

1428

3618

180

1.3 k

728

Released

Bill of Materials

Bambu Filaments

Select all

PLA Matte

Description

Boost Me (for free)

I want to take a second to thank everyone who has contributed to the success of this model!
Your interactions, likes, prints, comments, photos and boosts are amazing! I am so grateful!
Thank you!

The casket shelf with a drawer!

Perfect for anyone appreciates a little darkness. This coffin scales perfectly and prints beautifully. Works on your desk, or on it's own shelf. An amazing display for your crystals, figurines, geodes, fossils, you name it!

Printed on P1S but the profile should work on any printer.

I have included profiles for 3 sizes with ironing at .16mm layer height:

Small (20%) single plate. 8cm(3¼"). 43minutes. 16g
Medium (50%) single plate. 21cm(8¼"). 4hours48minutes. 218g
Large (100%) 3 plates. 41cm(16¼"). 24hours19minutes. 1317g- I attempted this print a few times. My biggest issue with this one was warping of the bottom corners. A brim helped immensely along with fan control. For my P1S I took the top off, door open, AUX fan off, chamber fan 30%. I also kept the bed a little warmer (65) and printed at 205 to try to reduce creep. On the bright side of all the waste was, I was able to dial in my ironing.
Post processing included gentle clamping and holding after applying some clear 5 minute epoxy. Maybe you can find it in a more matched color. Don't use too much on matte PLA, it's shiny stuff as you may notice a tiny bit in my photos. Any gaps i saw light filter through, i touched with some filament and a soldering iron, but you could use anything to plug the holes.

I have printed these sizes but you should have no problem scaling to whatever size fits your space.

I used both Bambu Matte Charcoal and Overture Matte Black PLA. Both look amazing. I found the Overture to be slightly more difficult to work with. Use whatever you'd like! Just make sure you have your filament dialed in. If you would like to reduce the time a bit you can turn off ironing and try with a .2mm layer height. The orange is Bambu Basic PLA.

I suggest printing one of the small or medium first to make sure you like the look of your filament with the casket!

Please let me know what you think! I am open to suggestions!

Like, download, print, share, comment, rate, and if you deem it worthy, BOOST!

Comment & Rating (180)

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.