twgondeck

cover

plate_1.png

plate_2.png

plate_3.png

AU3D

20231208_232858_db7c514f-22cb-49cf-ba00-8b980ac474d4.webp

plate_1.webp

plate_2.webp

plate_3.webp

Make sure you have excellent bed adhesion. Otherwise you risk a print failure. I had multiple failures, so I added brims to the support structure. In the end I still had to use an extra textured build plate which is extremly sticky. Maybe try hair spray.&nbsp;Beware that you have to glue the red connection crosses to the model. The friction is not enough to hold everything in place. Post processing took me about 15 minutes for the cleanup and about 10 minutes for glueing. I used a thick ca glue.

Brims | Original-Colors | 0.2mm layer, 2 walls, 15% infill

plate_4.png

plate_5.png

plate_6.png

20231208_232920_1726c832-ea5d-47d4-b2d4-0d313dedf305.webp

plate_4.webp

plate_5.webp

plate_6.webp

Make sure you have excellent bed adhesion. Otherwise you risk a print failure. I had multiple failures, so I added brims to the support structure. In the end I still had to use an extra textured build plate which is extremly sticky. Alternatively, try try hair spray or slow down the print.&nbsp;Beware that you have to glue the red connection crosses to the model. The friction is not enough to hold everything in place. Post processing took me about 15 minutes for the cleanup and about 10 minutes for glueing. I used a thick ca glue.

for A1 Mini | Brims | Original-Colors | 0.2mm layer, 2 walls, 15% infill

It&#39;s a maze! It&#39;s a cube! It&#39;s surprisingly addictive.&nbsp;Fits 3/8&#34; ball bearing (anything smaller than 10mm). Print one of each corner and 6 brackets. Corners are labeled, just match up the letters to the corresponding corners.&nbsp;I also made a set that is pre-supported to help make sure they don&#39;t fall over while printing.

A-Maze-Ing Cube

ASIA

Print Profile(2)

Description

Comment & Rating (34)

License

Related Models