V2 - S400 Mini-ITX Case - (Inspired by FormD)

V2 version, this one fits much nicer and is much easier to put on and off the case. The previous one (Uploaded on printables) was a very snug fit whereas this one, while still not being a lose fit, doesn't feel like you're going to pull the paint off the case.

I have printed this myself and works perfectly. I printed the 100mm version because I do not have a right angle power cable.

This is a vertical stand for the S400. I could see a few for the S300 on other sites but decided I'd just make my own one for the S400 case as well.

This vertical stand saves even more space on the desk than what this tiny PC case already saves in terms of surface area and all the cables will be hidden by the stand. It will increase the height profile.

I have also attached a test print for you to try out rather than printing the whole thing so you can see how well it fits yours and scale it if necessary.

You will need to download the test print STL file and import it yourself and if you're happy then get the full thing :)

If you download the STL version of the full size, you will need to flip the model over so that the feet are up in the air. This reduces the amount of supports needed for the print.

You will need supports on this print. I used standard tree supports

Printed with 15% infill seems fine and not seen any deformation due to thermal elasticity. If you want to be on the safer side then maybe print in PETG or something else more heat resistant