sciencepirate

cover

IMG_20240912_174343180.jpg

Single color

plate_1.png

Cover.png

Single color, 0.2mm layer, 8 walls, 80% infill

PLATE 1

PLATE 2

plate_2.png

2024-09-12_ef898cba8eb88.png

No-AMS multicolor, 0.2mm layer, 8 walls, 80% infill

Berky

IMG_3720[1].JPG

IMG_3719[1].JPG

<p>Made a print profile for Polycarbonate, PC, for anyone out there as crazy as I am for printing with this! It should hold up way better than PLA or most non nylon filaments. Added supports for better bed adhesion, I also modified my PC profile to only start the part cooling fan after layer 6, you only need to do that if the print starts warping. Slowed down acceleration, added more wall loops, and modified infill pattern and percentage. Feel free to turn off the bed skirt loops, I simply like using them from time to time. If the print still does not adhere to the bed a light layer of glue will be needed. </p>

PC (Polycarbonate) 0.2mm layer, 8 walls, 80% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<p>A simple S-type carabiner, suitable for placing light items on a backpack, tent, etc. Fully 3D-printed design. Only 10 grams of filament to print!</p>

S-type Dual Carabiner

ASIA

Print Profile(3)

Description

Comment & Rating (166)

License

Related Models