Toyota Keyfob Casing for Yaris / Celica / Corolla

Search models, users, collections, and posts

3ddicted

Hobby & DIY>Vehicles

IP Report

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

34 min

1 plate

4.6(16)

Open in Bambu Studio

Boost

106

235

488

305

Released

Bill of Materials

Maker's Supply Kits and Parts

Select all

M2x10 SHCS Machine Screw (20PCS) - AA151

M2 Socket Head Cap Machine Screws (SHCS)

M2 Socket Head Cap Machine Screws (SHCS)

Description

Hello Makerworlders!

Today I've made a casing for my Toyota Keyfob that broke and after days of turning the key with plyers while my wife kept the remote close to the dashboard, I've decided to fire Shapr3D and get something out!

The model can be printed in PLA, nothing really else needed.

0.2 mm levels

Supports Enabled for the buttons, Organic Trees

Printed separately the Toyota Badge to glue afterwards on the key, in order to maintain the PEI Texture on everything.

You will need 4 M2x10 Screws, and one M2x5 Screw for the key itself.

Hope my small creation can help others!

Boost Me (for free)

Hey.. *psst* hey you!... You know that boosting is free right? C'mon, drop one, we know you want to!

toyota

keyfob

key

Comment & Rating (39)

@user_2328030390

Corolla verso 2004 in Finland. The metal part of the key is wider than the hole in the key. Maybe country specific differences…

The designer has replied

@3ddicted

It might depend by the tollerance of your printer too! Try scaling the model to 105% and see if that works out!

@user_453588626

Replying to @3ddicted :

The key to my Toyota Land Cruiser 120 from 2005 is also wider. Solution: heat the key and melt the plastic. The screws don't go in well. M3 and I had to heat them, but I guess it's due to the material used. Design could be improved, but thank you very much. Made with a P2S.

Show original

@3ddicted

Replying to @user_453588626 :

Thank you for your comment. I only know that the key works fine with the Celica 7th gen cause i have 2, and tested on the Yaris and Corolla too.

@Brezelman

Print Profile

0.2mm layer, 2 walls, 15% infill

Exactly what I needed for my lexus. I had to add a third hole for the trunk-button though. First I used my Dremel which turned out very meh... Mind if I remix this with for my draft with a third button?

The profile uploader has replied

@3ddicted

Looks very good! I made it for my Celica, and it doesn't have a 3rd button, but if you're down to remix it go ahead by all means!

@vindawong

where can I get your file with the trunk button?

@Brezelman

Replying to @vindawong :

have a look at my files :) there is only one at the moment :D

@bdv666

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Good profile, I needed it for a Toyota Prado 120 key that broke. the key part is however different in shape in the bottom and it's thicker so I needed to cut away some pieces. would it be possible to get the base models so that I can re-design it for my key?

@treehugger42

same here, wish there was a re-mix for old Prado keys… I just grinded the key down and jammed it In place so it fused into the part.

@user_3651244246

How do I disassemble the blade from the original key?

The designer has replied

Show original

@3ddicted

A small screw holds the key in place; unscrewing it releases the key

Show original

@user_3651244246

Replying to @3ddicted :

Beyond the outer one? Where exactly? Do you happen to have a photo? I'm going crazy, I can't remove it

Show original

@layer.lab._

Replying to @user_3651244246 :

its fused with the plastic surrounding it. I peeled it with a hot blade from one side then heated the key just enough to pull out the other side of the plastic. @user_3651244246

@Diego_CO3

Print Profile

0.2mm layer, 2 walls, 15% infill

It does not fit the key very well

The profile uploader has replied

Show original

@3ddicted

Mind sharing a photo? So i can see where the issue could be. Is it the original remote or a third party? Sometimes the cars are sold with a third party fob if used

@Diego_CO3

Original remote, unfortunately I discarded the print, but the problem was that it wouldn't close because of the thickness

Show original

@treehugger42

FYI this also works for 2006 Toyota Prado keys, thanks for the model!!

@user_3688271670

Boosted

Just what i needed. Thank you.

The designer has replied

@3ddicted

Happy it helped!

@user_3970744743

this is closest print on here to a 2007 Toyota Camry. My keyhousing broke, and now I'm gonna have to try this on and maybe alter it maybe not...

@ZVIRok

Print Profile

0.2mm layer, 2 walls, 15% infill

супер

@norrlandpower

Print Profile

0.2mm layer, 2 walls, 15% infill

👌

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.