3D LED foot lamp St Etienne
Print Profile(3)
Description
Note:
Please pay attention to the seams on the drawing plate, the seams should be on the back of the plate, otherwise the text will not be printed correctly. Please make sure you check this when you cut the plate.
- Print the plate with a 0.4 nozzle, layer height 0.08.
Print the plate drawing on the surface of the plate, the white side up.
Speed 50mms, infill 100% without support.
- Print the box with a 0.4 nozzle, layer height 0.2.
Print the box base flat on the surface of the plate.
Standard speed, infill 15% without support.
- Print the frame with a 0.4 nozzle, layer height 0.2.
Print the frame flat side on the surface of the plate.
Standard speed, infill 100% without support.
Diameter of 13mm for the passage of an LED at the back of the box.
Add a battery-powered green LED for light and color.
The white can be replaced by green and a white LED light instead.
The printed lamp is 19.7cm wide and 18.1cm high.
The thickness of the plate is 0.6mm.
Happy printing everyone!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)