simple and easy to print I removed the hook because I was sticking it to the side of my print area 

Big man

1 Plate - Optimized profile (See description for more info)

snabbegoran

0.2mm layer, 6 walls, 25% infill

absolutely i can try and get that done for you in the next couple of days

Stellina

no follow up. .. also, can you take this model down or if you keep it up, correct it so the pieces fit together.. I've wasted filament for your laziness

user_3026924436

this would have been perfect!  my drawer for the lip has a width of 20mm.  can you upload a print with that for the lip?  it would mean the most to my little girl who cant reach the main trash.

IcedLip

user_741711278

Sorry to hear that. I check it out and I would recommend printing the insert at 99.9% scaling and that should work. Sorry for the inconvenience. 

Kero

I just sent this to a friend, they literally just bought it for $10

Larry

great idea I will definitely give it a try 

user_1627414801

0.2mm layer, 2 walls, 15% infill

Renan Barros

cover

PXL_20240830_012626857.jpg

PXL_20240830_012826354.jpg

PXL_20240830_013325321.jpg

PXL_20240830_012900763.jpg

PXL_20240830_013317101.jpg

plate_1.png

sturdy hanging garbage.webp

Corrected the mistakes in my original profile. 2 wall layers now as apposed to 6both on one print plate now&nbsp;

All parts

emilskibsted

Model.png

<ul><li>Reduced walls to 2, as it works fine with that amount</li><li>Added brims (Would not stick to the plate if I didn&#39;t have that)</li><li>Reduced Infill to 15% as it was enough.</li><li>Remade the support.</li><li>Resized the insert to 99% (for a perfect fit)</li><li>Made it fit on one plate</li></ul>

Skippy

IMG_8842.jpeg

Based on <a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/en/@emilskibsted">emilskibsted</a>&#39;s optimized profile above. My old kitchen doors are thicker than modern ones, so I&#39;ve modified this as followed:<ul><li>the hook has been extended to 20mm width</li><li>I added two little side hooks so I can also use this with shopping bag and hang with their handles instead</li><li>I had to paint extra supports because on my A1 the overhanging edge in the air was all loose strings</li><li>changed to Adaptive Cubic infill to save few grams of filament and time 😂</li></ul>

20mm hook width, extra supports (see description)

Designed to seamlessly fit over most kitchen cabinet doors, this hanging garbage bag holder provides a discreet yet convenient spot for trash, recycling, or compost. This design is sleek and space-saving yet sturdy. Please print the insert at 99.9% scaling

Print Profile(3)

Description

Comment & Rating (36)

License

Related Models

Sturdy Hanging Garbage Bag Holder for Cabinet Door

Print Profile(3)

Description

Comment & Rating (36)

License

Related Models