Mask of the High King - Free 3D Print Model

Search models, users, collections, and posts

MagniModels

Props & Cosplays>Masks & Helmets

IP Report

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

With Eye Holes

Designer

15.8 h

2 plates

4.9(24)

0.23mm layer, 3 walls, 8% infill

Designer

15.8 h

2 plates

5.0(3)

Open in Bambu Studio

Boost

1142

2512

1.1 k

238

Released

Description

Boost Me (for free)

If you found my design unique, I'd really appreciate your support!

Mask worn by Isildur.

It includes a bunch of raw files with different variations for uncut (in case you wanna cut it up yourself and make eye holes), cut, with straps, and with eyeholes. As well as separate straps if needed that can be glued on.

Would recommend sanding the areas you're gluing to for better adhesion.

They're also boolean cut with each side so they sit flush against the inside of the helmet (pic attached).

This was mainly made as a decor prop to just have sitting and eye-holes made it look less menacing somehow, but the option for them will be in another print profile.

Stretched cylinders added for extra support brim just in case.

For the strap, I used a 4cm width/30cm length elastic adjustable strap from another mask and it worked very well!

Comment & Rating (52)

@luna3dtech

Print Profile

With Eye Holes

Love the print

@SupaGamerz67

Wicked! One question as a new mask-maker, how'd you attach the separate parts together? Because currently I've been trying it via super glue, but it's a pretty struggling experience so far lol.

(Edited)

@user_1264602376

Boosted

hi! very nice work! can u pls send me a sliced mask?

(Edited)

@luna3dtech

Replying to @SupaGamerz67 :

I used Cyanoacrylate Glue and Activator Spray that I got from amazon. I believe the brand is MITREAPEL. The stuff is amazing and the glue dries in seconds.

(Edited)

@matthew.jnd

Boosted

Print Profile

With Eye Holes

amazing mask, glued to my old welding mask holder for nice stability and comfortable wear.

@Nullschall

Print Profile

With Eye Holes

Really enjoyed building this one. Print came out perfect and the supports came of very easy. Keep going with that kind of work!

@user_4170932080

What kind of paint is that and what colors? Mask looks great

@Nullschall

Lot of sanding, priming and mostly airbrush paint. I also did some dry brushing for the highlights. But if you are familiar with miniature painting techniques you can easily make this yourself (:

@NozzleNerd

great model, perfect profile and print. Had an amazing Halloween thanks to you ❤️

(Edited)

@TuuD_to_3D

sauron for sure

@swagmonster35

Boosted

Print Profile

With Eye Holes

amazing quality mask!

@Norkius

Print Profile

With Eye Holes

Printed well, then you for the model and print!

(Edited)

@rabbitrhyno

Print Profile

With Eye Holes

great print! came out perfect

@ablackravenstan

nice, I love your models, can you do sauron, I need it for Halloween, no pressure though

@jaberwok18

Boosted

sauron and the witch king! I wanted it for Halloween but I'll settle for next year or comicon

@joice97

Print Profile

0.23mm layer, 3 walls, 8% infill

I would give you 100 stars if I could, the quality of these masks is incredible, and the print profile is amazing I highly appreciate your work, I also follow you, and I hope you create more of these masks or other beautiful, detailed files <3

Show original

@hillo

Print Profile

With Eye Holes

the final print was very stringy and the mask broke in half while I was taking supports off but some glue will fix that and the top pieces that were printed next to it fell over mid print

The profile uploader has replied

@magni

Stringiness is always caused by filament being too wet which also leads to worse bed adhesion and layer adhesion. This wouldn't be a profile issue.

(Edited)

@hillo

Replying to @magni :

I will definitely keep that in mind thank you and I also found the problem two of the pieces fell over probably due to dirty bed and it started printing in the air but bed is clean now and I will be trying this again in the future

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Multicolour Majora's Mask

3DPrintDogs

9.9 k

4.5 k

Yaksha King Mask

jackji13333

1.1 k

1.2 k

Batman Cat Helmet

Azir

14.4 k

5.1 k

Pokemon Chess Set - remix high poly

SkinnyKirby

10.1 k

6.6 k