Bambu Studio and Orca Slicer infill test swatch

Heres a single sheet test print for infill.

all 18 infils currently available in Orca Slicer & Bambu Studio are shown with levels of 5%, 10% and 15%.

I'd highly recommend the last top layer in color if you don't have an AMS as it makes the text readable.

i've uploaded 2 files, one in a single color & the other for AMS users with 2 colors and only 6 color changes.

printed with standard settings 0.2m layer height with a 0.4mm nozel.

designed in Fusion360 and then spent what felt like an eternity setting each squares settings for infil in the slicer

i switched of the prime/purge tower on my own print as i'm well tuned in. if you have it enabled you may need to reposition where it is on the print bed so its not in the way.

If you want different infil percentages its easily customisable by just changing the settings for each box in the slicer and the text can also be changed

NOTE:

the file must be printed usiusing the .3mf file to preserve settings for infil. if you can see only squares with no infil when you preview or print you (or your slicer) has changed something. i tested & printed on a X1C however also tested A1/P1 settings and it all remained ok.

if you have a problem please comment and if needed i will upload whatever you need to make it work.