PrototypeSky

cover

IMG_2964.jpeg

IMG_2963.jpeg

IMG_2978.jpeg

plate_1.png

IMG_2979.jpeg

All Buckets, Lids, and Handle

IMG_3002.jpeg

IMG_3004.jpeg

Updated Handle for better latching

Updated Handle

IMG_3933.jpeg

Default profile set to recommended scale. If you wish to make it smaller, I recommended not going below a 15mm diameter, with profile set to 0.12mm fine. Followed by applying a thin coat of UV resin for added strength.

McEarrings

punks

IMG_2962.jpeg

This is as small as I recommend, 65mm Diameter, 2 walls, Detect thin walls

Pumpkins

IMG_2971.jpeg

Witch

IMG_2965.jpeg

Ghost

plate_2.png

plate_3.png

plate_4.png

cmcraig2

IMG_2086.jpeg

Didn&#39;t see a print profile for the buckets where they are separated out by build plate per their color and also have the needed support in place, so here it is.  Printing all 4 plates will get you the complete collection and enough handles for every bucket.  The support comes off decently easy once you punch a hole to grab the support fins with some pliers and yank.  The rim on the underside of the lids also has support.  This comes out easier with a small screwdriver or something to wedge underneath it and it will just peel out.

All buckets on separate plates - REQUIRED SUPPORT ADDED

scottobear

Mini Hallowe'en Buckets

Thinner walls, Raised and Angled rim for support free larger prints Smallest recommended size is 65mm diameter, with “Detect thin wall” checked

Mini Hallowe'en Buckets with thinner Wall

ASIA

Print Profile(7)

Description

Comment & Rating (223)

This remix is based on

License

Related Models