andrei

cover

6C9AB3B0-6AFF-4928-875A-6011C90C3271.jpeg

plate_1.png

2024-09-09_eb83eb3770a8d.jpeg

<ul><li>0.1 mm layer height</li><li>Optimized ironing settings for 0.2 mm nozzle</li><li>High infill density for sturdy/heavier print</li><li>No supports needed for the print due to bridge-ability</li></ul>

0.2mm nozzle, 0.1mm layer, 4 walls, 30% infill

New Stem

tester

plate_2.png

IMG_7159.JPG

IMG_7158.JPG

IMG_7157.PNG

IMG_7155.JPG

IMG_7156.JPG

Rounded stem to fit in open box switches.Made the stem fit tighter.Made the key cap bigger to match the bottom size of my other key caps.I left a one color tester on a different plate that prints in 35 mins as opposed to 2 hours if you wanna try sizing first. You can scale it to a size that fits.&nbsp;There&#39;s some stringing from bridging inside the cap, I suggest leaving it ( works just as good ) or using a knife but don&#39;t use a torch. I heated mine up quickly and changed the size of the stem by accident. I had to print another one...

Openbox Stem keycap

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

I am filling up my top row of keys with custom keycaps, and decided Doodlebob would be a fun one to add to the set! A 0.2 mm nozzle is needed for this print due to the very thin lines and size of the keycap.

Doodlebob Keycap for Cherry MX Mech Keyboards

ASIA

Print Profile(2)

Description

Comment & Rating (40)

License

Related Models