Ubiquiti Cloud Gateway Max M.2 Caddy (UCG MAX) - Free 3D Print Model

Search models, users, collections, and posts

marcosikkens

Tools>Other Tools

IP Report

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

22 min

1 plate

4.4(7)

Open in Bambu Studio

Boost

173

103

Released

Description

This is an M2 drive caddy for the for the Ubiquiti Cloud Gateway Max (UCG Max NS) with no storage built in.

I printed this in ABS with 100% infill, just to have something for the screw to bite in to. I used a random pc screw i had lying around.

Warning:

Do not print in PLA, the UCG Max can run quite hot and PLA will become soft.

Boost Me (for free)

The original Ubuquiti one will cost 20 euro with no shipping included. This one is free to use.

This model is also shared on printables.

ubiquiti

ucg

ucg-max

Comment & Rating (13)

@user_1130018528

Is it ok to print with petg?

The designer has replied

@655321

did you try this with petg? did it hold up?

@marcosikkens

sorry, i ment to reply earlier. the glas stransition temp is a bit lower. mine sits normally at like 67 degrees celsius. so i think it might work, but a more heat resistant one is recommended

@tr1umfntbasterd

printed with ASA. like some other had mentioned it is very tight. I used a dremmel and shaved 1/2 a mm off and it works like a charm. great print though!

The designer has replied

@marcosikkens

tight on the side edges you mean?

@marcosikkens

Replying to @marcosikkens :

@tr1umfntbasterd my idea behind that was that the end with the m.2 connector wouldnt lift up from the plastic. did you do a loose fit or a bit tighter?

(Edited)

@Bonetak

Print Profile

0.2mm layer, 2 walls, 15% infill

good

@poxixs1990

Print Profile

0.2mm layer, 2 walls, 15% infill

@chriscream

Print Profile

0.2mm layer, 2 walls, 15% infill

@BoothCP

Print Profile

0.2mm layer, 2 walls, 15% infill

@655321

Print Profile

0.2mm layer, 2 walls, 15% infill

@meCoreyG

Print Profile

0.2mm layer, 2 walls, 15% infill

@Zephnath

Print Profile

0.2mm layer, 2 walls, 15% infill

No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.