Flexi Spider (Articulated)

ℹ️Tips for printing:

• Filament: PLA (only use PLA)
• Supports: No
• Layer height: 0.16mm (optimal) (0.2mm also works)
• Wall loops: 3
• Infill: 15%
• Seam position: back
• Wall generator: -
• Detect thin walls: -
• Brim: No
• BuildPlate: Smooth (Textured Build Plates not recommended!) Use a build plate that you know has good adhesion!
• Info‼️: Do not scale the spider any smaller otherwise the connections will no longer work!
• Info‼️: If you apply too much force to the legs they may break because the connections are very small!
• Info‼️: Please be careful when removing the spider from the print bed!

------------------------------------------------------

❌‼Disclaimer‼❌ These files are provided for personal, non-commercial use only! This model is not suitable for young children or pets! Please store this model safely in environments with young children and pets, as small parts may pose a choking hazard or cause injuries. Avoid applying strong force, as it may damage the model and create hazardous fragments. After 3D printing, keep the model in a secure location out of reach of children and pets. Follow these precautions for safe use.

------------------------------------------------------

Colors and filament I used (3 Color Version):

• PLA / Black - for the body and legs
• PLA / Dark Brown - for the body and legs
• PLA / Red - for the eyes

Or decide for yourself which colors and how many you want to use!

ℹ️When you decide to print my multicolor Pre-Sliced (3mf file) for BambuLab I would recommend printing several models at once, not just one, to reduce waste!