Centrifugal Trick Box - Magnetic Lock
Print Profile(1)
Bill of Materials
Description
Centrifugal Secret Box - Magnetic Lock
This hexagon shaped Trick-Box has an unique close/opening mechanism.
If you close the lid, the magnets catch the locking pins and the box is locked.
The only way to open the box is to spin the thing with the handle and quickly lift the lid while its spinning.
Give this trick box to someone and they will despair trying to open it.đ
Optional Spinning Handle:
I added an optional print in place Spinning Handle to 3rd Plate. In this case you hold the handle and spin the box on the side. Let me know in the comments which you like more.
Assembly:
For assembly you need the printed parts from both build-plates and 6pcs Ă4x2 magnets
Push all magnets with the same pole orientation in the 3x inner and the 3x outer pins
Tip: Mark the magnets before, lay them on the table and press the pins over.
- Take the 3 âOuter pinsâ and push them in the 3 holes from the box. They must move freely!
- Take the other 3 pins and glue them to the inner holes of the lid.
- Push the handle into the center of the lid.
- Glue the little Spinning Center Pin under the box
Happy Printing!đ Don't forget to like & subscribe
Boost Me (for free)
Commercial license, Mods and more you can get here:
https://www.patreon.com/BamBamDesign/
Membership
You want to sell printed objects from my designs or just support my work? Now you can subscribe on Makerworld! Thank you!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (89)