Lemmy Koopa - Multi Part

Meet Lemmy: The Wild Koopaling!

Introducing Lemmy, the second Koopaling I’ve designed following Larry, which you can find on my Patreon. Lemmy has that punk rock vibe with his wild mohawk and rebellious spirit!

Dimensions:

- Scaling: I’ve provided two print profiles for Lemmy. For easier assembly, especially with his small claws, I recommend using the 130% scale. If you prefer to maintain scale consistency with my other Mario characters, use the 100% scale. For the 100% scale, a 0.2mm nozzle is recommended for the small white claws, as a 0.4mm nozzle may be to hard to assemble correctly.

Sizes:

- At 130% scale, Lemmy stands approximately 7.5 inches (190mm).

- At 100% scale, he is about 5.77 inches (146mm).

Colors Used:

- Elegoo: Matte White, Matte Black, Red (tongue), Yellow, Orange, Beige

- Elegoo Pla Pro: Light Blue

- Geetech: Grey

- Esun: Fire Engine Red (inside mouth), Magenta (hair)

- Creality Hyper Series: Green

Note: In the pictures, I used Elegoo Matte Sunshine Yellow for the body and hands, and Elegoo Yellow for other parts. I combined all yellows into one print profile color.

Printing Tips:

- Apply a glue stick to the print bed for better adhesion.

- Supports are needed for the beige mouth, body, hands, white shell, and green head.

- Use rafts for the chest, tongue, all hair parts, and white eyes.

Assembly Tips:

1. For the mouth, insert the top red piece first, followed by the bottom piece and then the tongue. Align them carefully as they may be tight, but they will fit into place.

2. When attaching the hair pieces, start with the front yellow piece by gluing it on. Let it dry completely before adding the next piece (magenta). Continue this process for all hair pieces, ensuring each piece is securely glued to the head and the hair piece it touches.

Assembly Steps:

1. Snap the chest piece into the yellow body, ensuring it aligns correctly and is fully pressed in.

2. Glue the white foot claws, making sure to place them on the correct sides.

3. Assemble the shell by first gluing the orange shell to the white shell, then glue the shell spike rings, followed by the spikes. Attach the completed shell to the body.

4. Assemble the bracelets with the spikes, gluing each piece in place.

5. Attach the hand claws, paying attention to the left and right pieces.

6. Insert the hand pins into the hands and bracelets, then glue them onto the body. Optionally, you can leave the hands unglued for the hands to rotate.

7. Assemble the mouth by inserting the top inner mouth piece first, then the bottom piece, and glue on the tongue.

8. Insert the orange stripes onto the sides of the head.

9. Attach the hair pieces following the earlier tips.

10. Attach the green head to the mouth using generous amounts of glue, allowing it to dry completely.

11. Assemble the eyes and glue them in place on the head.

12. Glue the head pin onto the body, then glue the head to the pin and body.

13. Glue the top green wand piece to the wand with the pin.

Congratulations on completing your Koopaling! If you’d like to add another Koopalings to your collection, visit my Patreon to get the latest, Larry. Thank you for your support and enjoy your new creation!