Yamaha Tracer/FJ09 - Seat Slope Angle Adjustment
Print Profile(1)
Description
Boost Me (for free)
Support more cool designs!
Spacers to raise the front of the seat 3, 4, 5, 6, or 8mm. These spacers are easily and quickly installed, swapped, and removed.
Simply loosen the two bolts holding the tank in place. The tank spacers slip between the tank bracket and frame, and the seat spacers slip into place and lock in between the seat and seat frame.
- Photo and schematics show installation details.
- The seat must be in the LOW position.
- Use the same spacer thickness for all spacers.
- Remove seat.
- Loosen the two tank bolts with enough clearance to slip in desired height tank spacers.
- Gently raise the tank
- Insert both tank spacers between the frame and tank bracket. (The tank spacers should straddle each bolt.)
- Lower the tank and Tighten the two tank bolts.
- Attach the Left and Right seat spacers onto the plastic seat frame.
Place them on top of the plastic seat frame where the seat bumpers rest (in the LOW position.) - Install seat.
- Ride!
- Swap to thicker or thinner spacers to find your ideal angle.
Recommend solid or high infill. Strong, durable exterior grade material (PETG, ABS,ASA, PA etc)
Included spacer heights: 3, 4, 5, 6, 8mm
Membership
Want to print and sells our designs? Get a commercial license membership!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (15)