Print Profile(10)
Description
This model took me a long time to create, and I revised it many times. This final version offers the best balance of material use and print time. If you find it useful, please consider boosting me. Thank you.
Boost Me (for free)
The model is provided in nine formats, allowing for a 9-grid arrangement or the construction of a custom display wall.
The print configuration includes the complete set of files. Individual display cases are also available for download.
Each display case uses only 75G of filament and takes only 2H to print.
Accessories:
Acrylic Dimensions: 110*55*2
3mm*15mm Sponge Pads
Lighting Accessories Needed:
1206 LED chip *2 (If using a wireless version, wiring is required. Use 32AWG wire; single wire diameter should not exceed 0.4mm) Leave 30cm+ wire length.
Heat Shrink Tubing: 1MM inner diameter
220V to 3V 4A Power Supply
Assembly Instructions:
1. Remove the pre-installed acrylic brackets
2. Pass LEDs through the holes
3. Secure LEDs in place with sponge glue or double-sided adhesive tape.
4. Use heat shrink tubing to bundle and secure the wires.
5. Apply 3MM sponge pads (black ones; I forgot to take a picture) to prevent the model car from moving.
6. Place your beloved model car, and insert the acrylic.
7. Attach the closing clip.
8. Connect the 3V power supply and turn on the lights!!!!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (17)