Nintendo Switch Joycon Controller Multicolor Print Remixed by AM Maker

Remixed by

AM Maker

Hobby & DIY>Electronics

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

0.2mm layer, 2 walls, 15% infill

Designer

2.1 h

2 plates

4.7(101)

0.6mm nozzle, 0.3mm layer, 4 walls, 25% infill

5.6 h

1 plate

4.5(2)

Boost

211

387

114

776

1.1 k

Released

Description

Nintendo Switch Controller Holder, modified to have black rounded end caps and black L and R button tops. Follow link instuctions for removing supports and gluing end caps. Look here if you need a stand : Stand for Joycon Controllers Nintendo Switch by mercuri.alessandro - MakerWorld

Comment & Rating (114)

@83johnrowe

so after now restarting this print for the 4th time thinking I had some kind of filament issue or bearing issue, I'm finally reading the comments and I'm now looking closely at everyones photos (specifically the red, dark blue, dark green and black images here) and realising I'm printing the same exact imperfections as everyone else. At least I only stopped the prints at 10-15% and not 80-100%. oh well, guess I'll let this one finish and see how it looks completed. Maybe it's time for me to try some postprocessing finishes...

(Edited)

@DarkLink

Hi, I'm have the exact same problem, I've tried 2 different filaments did you ever resolve this ?

@83johnrowe

Replying to @DarkLink :

no, its a deformation in the model, i ended up just leaving them. you could put in into fusion or something and attempt some smoothing on the mesh model, but in the end i just left them as they are.

@DarkLink

Replying to @83johnrowe :

Bummer, thanks... i love the design, ill have to leave them how they are.

@Denk

Print Profile

0.2mm layer, 2 walls, 15% infill

Super Controller für die Switch Hab sie 1 mal in Pla und 1 mal in Petg gedruckt

@breker.philipp

und welcher ist besser pla oder petg

@Denk

Replying to @breker.philipp :

pla fühlt sich wertiger an

@ME3D

Print Profile

0.2mm layer, 2 walls, 15% infill

made two so far and working on four total by Christmas! thanks and hope it works! lol

The designer has replied

@AMMaker

Awesome! Check out the stand if you need a place to store them 😉

(Edited)

@BananaBreadMan

Print Profile

0.2mm layer, 2 walls, 15% infill

Came out perfect with the print profile as is, 1st try and even from my phone, using Bambu Basic White. Thanks for the model as it makes the kids and family enjoy family game night more!

@Collecticraft

Print Profile

0.2mm layer, 2 walls, 15% infill

amazing supportless project! printed flawlessly

@stahl.mario

Print Profile

0.2mm layer, 2 walls, 15% infill

everything ok

@C.C.C

Print Profile

0.2mm layer, 2 walls, 15% infill

turned out amazing!

@jorge.lchinea

Print Profile

0.2mm layer, 2 walls, 15% infill

perfect pla print

@nickollaamir

Print Profile

0.2mm layer, 2 walls, 15% infill

The print comes out really well with the provided profile, but I’m not too certain on the part strength with just 2 walls, I would’ve liked to see 3 walls at least. The overhangs and bridges came out really well so I’m happy to see that. my only other critique is that this print uses grid infill, which is really outdated as it causes a higher probability of nozzle crashes and print failures. I’d suggest to update this profile with gyroid infill since that doesn’t cross itself.

@Sonic315

Print Profile

0.2mm layer, 2 walls, 15% infill

Perfekt!!! Es passt alles, der Controller geht leicht rein und raus und die Schultertasten lassen sich leicht und sauber drücken. außerdem liegt er auch gut in der Hand. Werde 3 weitere Drucken und den Ständer dazu. ich bin mehr als zufrieden. Danke