Search models, users, collections, and posts
Saw Blade Cleaning system
IP Report
Print Profile(2)
0.2mm layer, 2 walls, 15% infill
Designer
2.8 h
1 plate
0.2mm layer, 2 walls, 15% infill
Designer
45 min
1 plate
Open in Bambu Studio
Boost
213
902
25
10
204
126
Released
Bill of Materials
List other parts
- magnets x 2: 16mm Neodinium Magnets with hole
- Scrubber Pad x 1: 12" floor scrubber with 80mm center hole
Description
This is a blade cleaner inspired by a much more expensive one on the market. It requires just two 16mmx5mm magnets with a hole that can be screwed into the handle. The scrubber pad is a 12" floor scrubber pad found on Amazon for about $10. There is a arbor adapter so you can do blades with a 5/8" arbor or 20mm. I use a pitch remover or Simply green HD cleaner in a sprat bottle to spray the Blade, let it sit for a couple of minutes, spray again, then place the blade on the arbor and rotate using the magnetic handle. Rotate in the opposite direction of the cutting direction.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (25)