Hueforge Ikky Fenix
Print Profile(1)
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x245.26mm in size
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 4
PLA Smart_Recycled Amarillo Transmission Distance: 9.3
PLA BambuLab Basic Orange Transmission Distance: 5
PLA Smart_Recycled Blanco Transmission Distance: 6.4
This print uses 5 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Red
At layer #13 (1.12mm) swap to Amarillo
At layer #24 (2mm) swap to Orange
At layer #25 (2.08mm) swap to Red
At layer #26 (2.16mm) swap to Blanco for the rest.
Print with 100% infill, a layer height of 0.08 mm, and a base layer of 0.16 mm
The model measures 200x245.26 mm.
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 4
PLA Smart_Recycled Amarillo Transmission Distance: 9.3
PLA BambuLab Basic Orange Transmission Distance: 5
PLA Smart_Recycled Blanco Transmission Distance: 6.4
This print uses 5 unique filaments.
Swap Instructions:
Start with Black
At layer #8 (0.72 mm), swap to Red
At layer #13 (1.12 mm), swap to Amarillo
At layer #24 (2 mm), swap to Orange
At layer #25 (2.08 mm), swap to Red
Boost Me (for free)
If you like the job, don't hesitate to offer me a boost.
Si te gusta el trabajo no dudes en ofrecerme un boost
At layer #26 (2.16 mm), swap to Blanco for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (4)