120mm Fan Adapter to 75mm/80mm/100mm/150mm flexible duct - external version
Print Profile(6)
Description
Boost Me (for free)
If you find this model helpful, please consider supporting me. Thank you!
This adapter converts a 120mm fan to 75mm/80mm/100mm/115mm flexible tubing, enabling temperature control by venting after enclosure. I used PETG material for printing. During angled prints, the temperature was too low and caused layer separation. I used 230°C for the first layer and 250°C for subsequent layers. Stringing was minimal, with occasional burrs. Adjust parameters based on your specific needs. The interface is equipped with an anti-slip ring. You can secure the tubing using a pipe clamp, or reinforce it with tape.
This update adds models for connecting 100mm and 115mm flexible tubing, accommodating a broader range of tubing types.
The 120mm fan hole position is shown below:
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (20)