NCC-1031A USS Discovery HueForge
Print Profile(1)
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x145.07mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used:
PLA Bambu Labs Black Transmission Distance: 0.4
PLA Sunlu HS Grey Transmission Distance: 0.8
PLA Bambu Labs Cyan Transmission Distance: 2.3
PLA Bambu Labs Jade White Transmission Distance: 5.9
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Grey
At layer #12 (1.04mm) swap to Cyan
At layer #15 (1.28mm) swap to Jade White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (10)