Alphabet puzzle board

Please read everything before printing. Bambu Handy app optimized.

X1c users: REMOVE the flow dynamics calibration lines on the front of your build plate before the printer starts the first layer, or turn it off before starting the print,

ADULT SUPERVISION ADVISED. After all, these are smaller plastic pieces, especially if you print on the A1 mini.

I designed this alphabet puzzle board to be low on filament but sturdy enough for a child to toss around.

I have included print profiles for P series, X series printers, A1, as well as a print profile for the A1 mini. 

What’s nice about this alphabet puzzle is that it is also color coordinated unlike a lot of other boards I have seen available for printing. This will help your young child associate the letters with the correct spots as the colored letter will match the insert location for each particular letter. I also made the letters a bit taller than other boards as I think it’s easier for a younger child to grab. My two-year-old loves it, and hasn’t put it down.

After loading the profile into bambu studio or Handy app, you can change any of the 4 colors to whatever you choose, but do not adjust the settings, especially the first layer speeds. Its imperative that you get good layer adhesion to minimize any warping, and the slower initial layer speed will help with this. 

I hope you enjoy, and please consider liking and boosting to show your support, as well as rating the print profiles. It really helps me with all of the filament I waste when designing and prototyping. thank you so much for all of the support!