minutezehn

cover

2024-09-05 16.59.25.jpg

plate_1.png

2024-09-05_6aa70a84ac2a8

2024-09-05_90bb72b3e9eb.jpg

1 Colour

2024-09-05_d5f37c005ab79

2 Colours

HS_sonicYT

Copilot_20260611_074628.png

<h2>🥷 3D Printed Two-Tone Shuriken (Ninja Star) Display Model</h2><h3>📝 Project Overview</h3><p>This is a sleek, multi-colored <strong>Shuriken (Ninja Star)</strong> model designed for dual-color 3D printing. It features a dark center body with contrast-colored blade edges to make the geometry pop. This model is ideal as a cool desk toy, a cosplay prop, or a geometric display piece.</p><ul><li><strong>Object Name:</strong> Shuriken_2_colour</li><li><strong>File Format:</strong> .stl (Color-separated for modern slicers)</li><li><strong>Total Dimensions:</strong> 109.79 mm×95.09 mm×6.00 mm</li><li><strong>Total Volume:</strong> 13,995.3 mm3</li><li><strong>Total Triangle Count:</strong> 16,344</li></ul><h3>🖨️ Recommended Print Settings</h3><p>This model has been fully tested and optimized in <strong>Bambu Studio</strong> for a flawless print experience.</p><h4>🧰 Hardware &amp; Materials</h4><ul><li><strong>Printer:</strong> Bambu Lab P1S / X1C</li><li><strong>Build Plate:</strong> Bambu Textured PEI Plate (Provides a great surface texture)</li><li><strong>Nozzle:</strong> 0.4 mm Diameter</li><li><strong>Filament 1:</strong> Bambu PLA Basic (Black/Dark Grey for the main body)</li><li><strong>Filament 2:</strong> Bambu PLA Basic (White/Silver for the outer edges)</li></ul><h4>⚙️ Slicer Settings</h4><ul><li><strong>Layer Height:</strong> 0.15 mm (Initial layer height: 0.15 mm)</li><li><strong>Wall Loops:</strong> 4 (Provides strength to the sharp points)</li><li><strong>Infill Density:</strong> 100% Solid (Recommended for a heavy, realistic feel)</li><li><strong>Infill Pattern:</strong> Monotonic (Top and Bottom surface layers)</li><li><strong>Supports:</strong> <strong>Disabled</strong> (The flat base and sloped edges print perfectly without any support material)</li><li><strong>Prime Tower:</strong> Enabled (Width: 35 mm, Max Speed: 90 mm/s to ensure clean color transitions)</li></ul><h3>📊 Print Stats &amp; Performance</h3><ul><li><strong>Total Print Time:</strong> ~53 minutes and 40 seconds</li><li><strong>Preparation Time:</strong> 6 minutes and 16 seconds</li><li><strong>Filament Usage:</strong> ~14.51 grams (Filament 1: 12.93g / Filament 2: 1.58g)</li><li><strong>Filament Changes:</strong> Only 1 change required (Efficient layer-based coloring)</li></ul><h3>💡 Assembly &amp; Post-Processing</h3><ol><li><strong>Cooling:</strong> Allow the Textured PEI plate to cool down completely before removing the model to prevent warping.</li><li><strong>Bed Adhesion:</strong> No brim is needed, but ensure your build plate is clean of fingerprints for the best first-layer stick.</li><li><strong>Finish:</strong> The model prints as a solid, single piece. No gluing or assembly required!</li></ol>

Shuriken star, 0.12mm layer, 4 walls, 50% infill, 14.51g!

Gokburt

shuriken100.png

<p>0.15mm layer, 4 walls, 100% infill</p>

Strongest version 100% infill: WARNING: VERY LETHAL

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<boostme><boosttitle>Boost Me</boosttitle><boostcontent>Thank you! :D</boostcontent></boostme>

Shuriken

ASIA

Print Profile(4)

Description

Comment & Rating (561)

License

Related Models