Steeldart Point Cones

Instead of ordering them online I created these small cones, that can be slid over the tips of your steeldarts.

They are meant to reduce the chance of bounces due to the beginning of the barrel hitting the flights of the other darts already in the board.

There a re 3 versions:

• Version 1 is of low height and has a filleted inner part to slide slightly over the barrel of the dart
• Version 2 is of low height and has a flat base to lay flat on the barrel of your darts
• Version 3 is taller and has a filleted inner part to slide slightly over the barrel of the dart

I do not have a .2mm nozzle, so I printed these with my P1S and the default .4mm nozzle.

But if you have, I would recommend using a .2mm nozzle.

The Darts shown in the pictures are the Red Dragon Amberjack Pro 24g and the Red Dragon Defender 24g.