Pixel 8 Pro TPU Case - Free 3D Print Model

Search models, users, collections, and posts

AMMA Prints

Hobby & DIY>Electronics

IP Report

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.16mm layer, 10 walls, 15% infill

Designer

6.5 h

1 plate

4.6(56)

Open in Bambu Studio

Boost

184

436

1.3 k

581

Released

Description

This pixel 8 pro case is designed to be printed in TPU. I designed the case to protect as much of the phone as possible without being too bulky. There are only 3 small areas that need support (speaker/mic holes), which the support material pulled off pretty easy. The case model is solid and I removed the top and bottom layers in Bambu Studio to show the infill on the back of the phone, that way you can select whatever infill you like the pattern of and tweak the settings to get different results. I have tested it, and it still works with wireless charging on the pixel stand chargers (1 and 2), other chargers may or may not work, not sure as I don't have other wireless chargers.

Comment & Rating (76)

@seasoned_mill

came out really great on Sunlu TPU Silk, thanks!

@scooterb415

Boosted

Print Profile

0.16mm layer, 10 walls, 15% infill

fits but doesn't feel very secure

The profile uploader has replied

@AMMAPrints

Sorry to hear that. It fits very well on my phone, I went through many design iterations to get the case fitting snug because I wanted my phone as protected as possible. It looks like it didn't finish the top few layers when you printed it which would make it less secure. In your first picture it looks like it is missing the radii on the corners of the charging port opening, and it also looks like the side buttons are visible which should be hidden by the top layers. Also the inside edge of the case should meet up with your screen protector which it looks like there is a gap.

(Edited)

@krminix

Print Profile

0.16mm layer, 10 walls, 15% infill

Great print! I may try to scale the sides down a bit, pretty chunky, but i feel like this is a great case and will protect my phone! Printed with generic white TPU.

(Edited)

@Epsylon3d

hi, why i ve not the honeycomb file??

The designer has replied

@AMMAPrints

Hi, I made the model solid and then set the top and bottom layers to zero in the slicer and then set the infill to honeycomb which then shows the honeycomb pattern since there isn't any top or bottom layers. Doing it that way made it so you can easily switch patterns by just changing the infill pattern in the slicer without remodelling.

@user_1752977125

The print worked well with eTPU-GS 95A natural from esun. Filament dryer from eBox by esun helped a lot. The supports detached easily. The model seems a bit clunky, I would have liked a bridge at the USB port as well. Thanks for the model

Show original

@y_y0711

Print Profile

0.16mm layer, 10 walls, 15% infill

schöner Druck

@BurdTurglar

Print Profile

0.16mm layer, 10 walls, 15% infill

Printed perfectly with Overture TPU! I used the generic TPU preset with no tweaks. Great print profile

@nprint.info

Print Profile

0.16mm layer, 10 walls, 15% infill

cool 😃

@noriwl

Print Profile

0.16mm layer, 10 walls, 15% infill

printed fine on the a1 mini in tpu

@devnsyde

Print Profile

0.16mm layer, 10 walls, 15% infill

I've already dropped my phone and the case protected it.

The profile uploader has replied

@AMMAPrints

glad it helped :)

(Edited)

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Flat-Edged AirPods Pro (2) Case

gimpelginster

24.4 k

7.1 k

Mini Iphone 16 Pro

Oleksandr T2L

31 k

10.7 k

The Perfect TPU profile

AllFor3D

23.7 k

5.3 k

Google Pixel 8 Pro CASE TPU

3DCaseFactory

415