Hueforge Araneus Oscorpeus Spiderman Pop Art
Print Profile(1)
Description
Hueforge Araneus Oscorpeus "Spiderman Spider" Fan Art Print, Starts with Black, blue, Red and White. Resulting in a high quality high texture print in the 2.5mm height range. File is set at 200mm x 200mm but can be changed, do not change the height (Z axis). Colors can be changed to suit your needs.
Check out patreon.com/TheMadFabricator for more of my files. Become a member to get them all for free as well as commercial rights to sell the prints. Have a ton more going up over the next month or so.
Project: widow blk blu red wht.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 1.2mm
The Max Depth is 3mm and the Actual Depth is 2.5mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Blue Transmission Distance: 4
PLA BambuLab Basic Red Transmission Distance: 4
PLA PolyLite White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #17 (1.44mm) swap to Blue
At layer #18 (1.52mm) swap to Red
At layer #23 (1.92mm) swap to White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)