Search models, users, collections, and posts
Mac Miller Hueforge
IP Report
Print Profile(1)
0.08mm layer, 1 walls, 100% infill
Designer
9.4 h
1 plate
Open in Bambu Studio
Boost
52
107
5
7
83
42
Released
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 174.82x245mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA 3DHojor Black Transmission Distance: 0.3
PLA IIID Max Night Gray Transmission Distance: 3
PLA 3DHojor Matte Gray Transmission Distance: 1
PLA 3DHojor White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Dark Gray
At layer #13 (1.12mm) swap to Light Grey
At layer #20 (1.68mm) swap to White for the rest.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (5)