Search models, users, collections, and posts
Snake HueForge
IP Report
Print Profile(1)
0.08mm layer, 1 walls, 100% infill
Designer
3.2 h
1 plate
Open in Bambu Studio
Boost
49
67
6
3
68
25
Released
Description
Project: Schlangen Weiß
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 100.16x178mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Red Transmission Distance: 7.5
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Matte Ivory White Transmission Distance: 3.5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Red
At layer #14 (1.2mm) swap to Blue Gray
At layer #19 (1.6mm) swap to Ivory White for the rest.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (6)