Govee Outdoor Lights Pro Bracket Mount - Free 3D Print Model

Search models, users, collections, and posts

Jaxel

Household>Other House Models

IP Report

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 3 walls, 15% infill

Designer

15.1 h

5 plates

4.9(158)

Open in Bambu Studio

Boost

540

1381

214

285

2.3 k

1.6 k

Released

Description

2024-09-22: Added mounts for the couplers, folded wires, and the power brick/controller.

2024-09-19: Flipped the print profiles so that the bridges print better.

This is a mount for the Govee Permanent Outdoor Lights PRO. H706

The holes are spaced for 46mm… which happens to be the exact distance of the holes on my soffits.

I used #6 machine screws for the holes.

=====

If you appreciate my models, please consider buying me a coffee!

govee

h706

Comment & Rating (214)

@mimicastle

Boosted

I originally printed 12 but found them all warping/lifting off of the plate at layer 15. Had to trash those and start over. I used glue on a textured Bambu plate and the next print didn't warp - but they also didn't fit. I printed again (textured plate with glue) at 100.5% based on a prior comment and they were perfect! I printed 60 light mounts in ASA at 100.5% and installed our Pros yesterday. I used these in addition to the 3M tape that comes on the lights, so they shouldn't go anywhere for a very long time. I'm printing the module holder now.

@imsatasia

Boosted

Controller plate is creating strings on one side - maybe missing support? anyone else printed and worked fine for them? 1 was complete waste but other 2 shows stringing. I’m printing on ABS

(Edited)

@Shofstall

Boosted

The same exact thing happens to me and I’ve tried printing this 3 different times. Both PLA and PETG. No luck!

@Shofstall

Boosted

Same.

@camorimcanada

Replying to @Shofstall :

That need support to be printed that way..

@bitsnbytespc

Print Profile

0.2mm layer, 3 walls, 15% infill

worked great, thanks for this!

@hrrsnwchtl

Print Profile

0.2mm layer, 3 walls, 15% infill

printed perfectly at 100.5%

@user_3759635164

how did you increase to 100.5? can’t figure it out

@Mwromine101

Replying to @user_3759635164 :

go to your scale settings and don't do 100.5, do 102%. They will slip in perfectly.

@LayersbyLeobhi

Boosted

Amazing model. Printed loads of these in PETG

@Nan_Su

Boosted

Print Profile

0.2mm layer, 3 walls, 15% infill

Good design.

@user_84403739

I printed 130 of these before mine arrived, and they don't fit. What am I doing wrong? The file is 58x42x8 in the slicer. I have the pro lights, 200' string. They are the 706. They fit upside down a bit, but won't fit regular way.

(Edited)

@Mwromine101

Increase to 102%

@HandmadeSerena

Boosted

Boosted! Thanks for making this!! Turned out awesome! I did scale the brackets to 100.6% Thanks again!

@jtfuel

Boosted

Print Profile

0.2mm layer, 3 walls, 15% infill

Perfect print and fit. Used Elegoo PETG. No adjustment needed for me on P1S. Thanks for sharing.

@max_lsc

Boosted

Print Profile

0.2mm layer, 3 walls, 15% infill

super tight fit, these are exactly what I was looking for!

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.