Bic Pmag Lighter case Without Belt clip - Free 3D Print Model

Search models, users, collections, and posts

TazDaMan53

Tools>Hand Tools

IP Report

Print Profile(1)

All

P1S

X1 Carbon

X1E

A1 mini

X2D

P2S

A2L

H2C

H2D

P1P

H2S

H2D Pro

0.20mm layer, 2 walls, 15% infill

Designer

1.5 h

1 plate

4.6(10)

Open in Bambu Studio

Boost

145

178

Released

Description

The original was just about what I was looking for. I really want to thank @Djustnibiru for this amazing file. The only reason I edited the file was to fit my needs. I also noticed that when I printed the file there were some thin walls. (this could have been my settings) I also wanted a belt clip as my pickets are always full of things.

Things I changed:

The position of the hole to be more centered so it would eliminate the thin walls
Added a belt clip
Fixed the tilt removing the need for supports on the first layer

Turned out nice! Maybe someone else can enjoy it as well.

Thank you to the original designer. @Djustnibiru

feedback

Boost Me (for free)

*** This is my 1st upload ***
Please let me know how this file works for you. If you want any changes or adjustments please feel to let me know. I will do my best to update and fix anything that is needed.

The original file can be found here on Makerworld at:

https://makerworld.com/en/models/455996?from=search#profileId-363745

Please go to the link and give the original creator a thumbs up and maybe a boost if you have. :)

Comment & Rating (21)

@SM0KESCR33N

Tried this print 3 times... first attempt broke loose from the plate at 96%... second time broke loose at 20%... third attempt broke loose at 80%. I cleaned my plate each time with IPA just to be sure. It's also a brand new plate. I even slowed the speed down to 50% on the last attempt. Safe to say this model has adhesion issues. I have a feeling it has to do with the design not having a perfectly plain flat base or the lack of a brim.

(Edited)

The designer has replied

@vinway

did you try the liquid glue? it really makes a difference on stuff like this

@TazDaMan53

Hello, Thank you for the feed back I am re-printing it to see if I can reproduce this issue. Can you let me know what heat settings you were using and the type of filament? Just wondering have you tried to print with a brim?

@SM0KESCR33N

Replying to @TazDaMan53 :

I printed as is.. stock settings for the material and brand of filament on an A1 mini. I was using Polymaker PETG in black. I'll admit I was frustrated after 3 tries and didn't attempt with a brim.

@printsamaritan

Boosted

Print Profile

0.20mm layer, 2 walls, 15% infill

perfect once again with pla basic

@printsamaritan

Boosted

printed fine for me on textured plate. x1 carbon. I had tried the original one 3 times and had three fails. this one worked the first time no problem.

@Grimdar

Print Profile

0.20mm layer, 2 walls, 15% infill

@Njdevil81420

don't see one with a belt clip on it, exact same file as the original creator..........

The designer has replied

@TazDaMan53

Hello, The original file had some very thin walls, which resulted in holes when printed. I’ve adjusted the hole placement for the lighter to achieve more even wall thickness. I'm working on the belt clip to ensure it prints correctly and doesn't snap off due to layer line placement.

@AE86Matt

id give this 1 star for the title not even having what it says.

@user_2017770192

Print Profile

0.20mm layer, 2 walls, 15% infill

Fits a regular size bic lighter perfectly!

@user_504366006

Boosted

Print Profile

0.20mm layer, 2 walls, 15% infill

print came out perfect

@puhrot

Print Profile

0.20mm layer, 2 walls, 15% infill

@user_3219525424

Print Profile

0.20mm layer, 2 walls, 15% infill

Bed Adhesion Issue:sucked

Strength Issue:sucked

Support Issue:sucked

The profile uploader has replied

@TazDaMan53

Thank you for the insight.

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.