Search models, users, collections, and posts
Asuka Langley Soryu (Evangelion) - Hueforge
IP Report
Print Profile(1)
0.08mm layer, 2 walls, 100% infill
Designer
1.6 h
1 plate
Open in Bambu Studio
Boost
35
100
7
3
86
43
Released
Description
Asuka Langley Soryu (Evangelion) - Hueforge
Please use the provided print profile or ensure to use the settings in red as described below:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 150x93.75mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2mm
Filaments Used:
PLA BambuLab Matte Charcoal
PLA BambuLab Matte Ivory White
PLA BambuLab Basic Red
This print uses 3 unique filaments
Swap Instructions:
Start with Charcoal
At layer #7 (0.64mm) swap to Ivory White
At layer #16 (1.36mm) swap to Charcoal
At layer #17 (1.44mm) swap to Red
At layer #23 (1.92mm) swap to Ivory White for the rest
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (7)