Katniss Everdeen Hueforge

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

You may print at higher layer heights below the Min Depth of 1mm
The Max Depth is 2mm and the Actual Depth is 2mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 2 unique filaments

Swap Instructions:
Start with Black
At layer #30 (1.32mm) swap to Jade White for the rest.

If you get the message with the floating regions when slicing... you can ignore this

If you want to resize, scale only x and y. Z must stay as it is