Straight drill jig - Free 3D Print Model

Search models, users, collections, and posts

lukasglowinski

Hobby & DIY>Other Hobby & DIY

IP Report

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 3 walls, 25% infill

Designer

58 min

2 plates

4.5(46)

Open in Bambu Studio

Boost

207

681

642

332

Released

Description

Now you can drill straight without problems. With this jig you can make perfect 90 degrees holes with 5, 6, 8 and 10mm drill. Just use replaceable bushing to fit the drill.
The jig also allow to make holes on the edge (45 degrees) and in the rods.

Use support for the jig. Layer height 0.2, 3 walls and 25% infill.

Comment & Rating (49)

@DesertCruiser

Boosted

Print Profile

0.2mm layer, 3 walls, 25% infill

Works great!

The profile uploader has replied

@lukasglowinski

Thanks. I'm glad you like it.

@KeylineStudio

Boosted

Print Profile

0.2mm layer, 3 walls, 25% infill

I like the idea and I thank the designer for this model. IMHO the design could be improved in order to guide the drill bit till the base.

@Caccia79

Print Profile

0.2mm layer, 3 walls, 25% infill

Printed in PETG for increased durability Multiple spare parts already printed

Show original

@nino13893

Print Profile

0.2mm layer, 3 walls, 25% infill

layer superiore disallineato, in entrambe le due stampe che ho fatto. Non sembra comunque intaccare la funzionalità.

(Edited)

@Theranch46

Boosted

Print Profile

0.2mm layer, 3 walls, 25% infill

very top project

@DefMaker

Print Profile

0.2mm layer, 3 walls, 25% infill

good

@tysimoneau

Print Profile

0.2mm layer, 3 walls, 25% infill

Works as designed with minimal issues. You will have to be careful that the cutting edges of the drill bit stay away from the collars as the wear quickly. Easily fixed by adding an oring over the drill bit once placed into the jig to prevent the bit from being withdrawn too far.