萝卜蝴蝶刀（长款）Carrot Balisong（Long model）
Copyright Claim
萝卜蝴蝶刀（长款）Carrot Balisong（Long model）
Boost
120
223
25
Print Profile(3)
By object, regular print, 0.2mm layer, 2 walls, 15% infill
58 min
1 plate
Both Karot Knafs!
1.5 h
2 plates
Both sizes for A1 Mini also
1.8 h
2 plates
Open in Bambu Studio
Boost
120
223
25
5
679
181
Released
Description
您好，如果您打算下载此模型，请考虑留下赞、发布制作、留下评论甚至捐赠。谢谢！
Hi There, if you plan on downloading this model please consider leaving a like, posting a make, leaving a review, or even a donation. Thank You!
我精心设计了这把萝卜蝴蝶刀的所有细节，你可以在不使用任何额外支撑的情况下完美的打印这个模型，但是你可能需要用到4个M3*6的平头螺丝。其中你需要打印两个"叶子(长)"零件，总共是三个零件。注意：在打印的时候你可能需要注意“叶子(长)”的打印方向，将不需要支撑的面做为底面。
I have carefully designed all the details of this Carrot Balisong so that you can print this model perfectly without any additional support, but you may need to use 4 M3*6 flathead screws. In which you need to print two "叶子(长)" parts, for a total of three parts.Note: When printing, you may need to pay attention to the printing direction of the "叶子(长)", using the side that does not need support as the bottom surface.
Bill of Materials
Bambu parts
Purchase from Bambu Store
Comment & Rating (25)
All
Print Profile
By object, regular print, 0.2mm layer, 2 walls, 15% infill
Very cool and funny! Was a blast to print. Printer in the cheapest, wettest PLA I had laying around and it came out really nice!
Thanks for creating it
0
Reply
Print Profile
By object, regular print, 0.2mm layer, 2 walls, 15% infill
Basically had to make the screw holes bigger on the carrot part. I made them 3.5 mm to fit M3 screws.
0
Reply
M3*5的螺丝 不知道会不会掉
0
Reply
Thank you! Fast and easy print. I think a corn version would be cool, too! I used Bambu PLA Basic Bambu Green and iSANMATE High Speed Orange PLA+ for my print.
(Edited)
0
Reply
Print Profile
By object, regular print, 0.2mm layer, 2 walls, 15% infill
Very Fun
0
Reply
Print Profile
By object, regular print, 0.2mm layer, 2 walls, 15% infill
the first of my veggie arsenal ... what have you started. lol
0
Reply
Print Profile
Both sizes for A1 Mini also
extremely good !
0
Reply
Print Profile
By object, regular print, 0.2mm layer, 2 walls, 15% infill
I increased walls and infill to make a more solid final object.
0
Reply
A1 mini?
0
Reply
Print Profile
By object, regular print, 0.2mm layer, 2 walls, 15% infill
We printed this in silver and black. The screws are holding and open/close motion is smooth.
0
Reply
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRemixes (1)
Related Models
© 2024 MakerWorld