Search models, users, collections, and posts
Pokéball Filament Swatch - I choose you!
IP Report
Print Profile(2)
0.16mm layer, 2 walls, 15% infill Only Wheel and Cap!
Designer
5.6 h
1 plate
0.2mm layer, 2 walls, 10% infill. Only bases and covers!
Designer
29.2 h
4 plates
Open in Bambu Studio
Boost
1287
3121
100
57
1.1 k
267
Released
Bill of Materials
Maker's Supply Kits and Parts
Select all
Description
The Pokéball Filament Swatch!
- Multiple parts and 2 print profiles for the A1
- Printing is very easy and does not require an AMS.
- Be aware that some kind of screw or bolt about 3.5mm is required as a hinge. Two springs or some metal wire is required for the button. Both the screw/bolt and the springs/metal wire can be superglued to their place. Be careful when inserting the screw/bolt because the hinges can break.
- You can glue on the covers with superglue.
- You can pop in and out the filament wheel so that you can easily manage the color swatches.
- Just spin the wheel and pick your favorite filament!
Happy printing!
License
This user content is licensed under a
Creative Commons Attribution
Comment & Rating (100)