Printlab3Duk

cover

IMG_1093.JPEG

IMG_0902.JPEG

IMG_0901.JPEG

IMG_0900.JPEG

IMG_0899.JPEG

plate_1.png

IMG_1093 (2).JPEG

IMG_1095.JPEG

20 Slot Nintendo Switch Game Case Holder&nbsp;Designed to be printed with AMS, however you can adjust the colour within the print profile to make the same to reduce total printing time.&nbsp;My profile is set to print at 0.2mm for the first 110 layers, then change to 0.16 to better capture the detail around the logo.&nbsp;The model does generate quite a bit of poop, around 114 filament changes once it gets to the logo. You can reduce this if you want to lower the layerheight at the top to 0.2, but will sacrifice on some of the detail.&nbsp;Model has be orientated to print upright to fit the X1C, P1S, P1P and A1, however, could be printed flat if printing on the H2D ro reduce print time.WIll not fit the A1 Mini

0.16mm layer, 2 walls, 20% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

20 Slot Nintendo Switch Game Case Stand&nbsp;Print in place using AMS&nbsp;Prints upright to fit the X1C P1P and P1S&nbsp;Default profile;0.12 Layer height from layer 111 for logo,0.20 Layer height for base (Upto 110)20% Gyroid infillOuterbrim enabled for better adhesion

20 Slot Nintendo Switch Game Case Holder

ASIA

Print Profile(1)

Description

Comment & Rating (14)

License

Related Models