flying eagle

The frame is made with frame generator for HueForge by Girouxra.

https://makerworld.com/en/models/514362#profileId-430525

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 150x150mm in size

You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
PLA 3dpower black Transmission Distance: 0.3
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA Prima Value Light gray Transmission Distance: 5
PLA Filafarm White Transmission Distance: 1
This print uses 4 unique filaments

Swap Instructions:
Start with black
At layer #10 (0.88mm) swap to Blue Gray
At layer #15 (1.28mm) swap to Light gray
At layer #21 (1.76mm) swap to White for the rest.