Search models, users, collections, and posts

Bottle Emptying Cap

rfnovo
Household>Other House Models
IP Report

Print Profile(1)

All
P1S
P1P
X1
X1 Carbon
X1E
A1
A1 mini
H2D
H2D Pro
H2S
P2S
H2C
X2D
A2L
0.2mm layer, 2 walls, 15% infill
0.2mm layer, 2 walls, 15% infill
1.5 h
1 plate
4.5(43)
Open in Bambu Studio
Boost
303
1149
50
19
954
716
Released 

Description

 

Supported needed only for the cap, as showed.

The Push-pull model is easier to use, but requires a well calibrated printer due to smaller tolerances.

The cap fits 36 orifice (means the current cap has 40mm diameter) while the adapter can be used to fit 26 orifice (30mm cap). If you need another size, just let me know and I can adjust.

It is a small model, so I'd suggest print with as many perimeters as possible to make it solid.

*If using with food, please make sure to use food safe material.

 

Comment & Rating (50)

(0/1000)
@user_315199479
Print Profile
0.2mm layer, 2 walls, 15% infill
Printed perfectly. Haven't needed it yet ,but seems to be the right size. Thanks!
(Edited)
0
Reply
@user_1569492072
Print Profile
0.2mm layer, 2 walls, 15% infill
printed out great and works great
0
Reply
@user_2587601398
requesting smaller size please
The designer has replied
0
Reply
@rfnovo
and what size would that be?
0
Reply
@user_3615309100
Print Profile
0.2mm layer, 2 walls, 15% infill
Requesting for the smaller version please for the smaller diameter bottles
0
Reply
@rfnovo
and what size would that be?
0
Reply
@Imzadi3015
Could you post some photos - i would like to know how to assemble this.
0
Reply
@Imzadi3015
Disregard. I figured it out. WHOA! THIS IS AWESOME. THANK YOU FOR THE FILE!!!!
0
Reply
@user_1220526212
Boosted
Print Profile
0.2mm layer, 2 walls, 15% infill
Good print especially for the threaded cap. The non-threaded cap doesn’t lock well in my print (could be user error …:) …)
1
Reply
@Mike_pro
Print Profile
0.2mm layer, 2 walls, 15% infill
I think it really needs more walls for the legs to not snap off when dropped, but otherwise love it, solves a huge pet peeve of mine with near empty lotion bottles!
0
Reply
@mcerk26
Print Profile
0.2mm layer, 2 walls, 15% infill
did not work for me, caps were loose and it leaked
0
Reply
@jc319
Hi thanks so much for this. Can you please make a smaller adaptor? I have a bottle with an outside diameter of 21.6mm, and a thread that sticks out to 23.7mm, the thread peaks are about 2.8mm apart.
0
Reply
@user_4020561244
Print Profile
0.2mm layer, 2 walls, 15% infill
Rate design dismiss a one more size that I needed bargain. And the support inside is hard to pull out
0
Reply

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Beer Bottle Opener
Beer Bottle Opener
DDDP
16.6 k
5 k
push opener (bottle opener)
push opener (bottle opener)
sabesnait
12.5 k
7.2 k
Bottle Cap Opener
Bottle Cap Opener
fifindr
11.7 k
5.5 k
Bottle Cap/Marker V2 - Protect your Drink
Bottle Cap/Marker V2 - Protect your Drink
BamBam Design
14.5 k
5.9 k