Obanai & Sanemi - Demon Slayer Bookmarks Set 6/8

If you want to sell prints of this model, as well as all of my models - future and past
Subscribe to My Patreon:

Or Subscribe for a commercial License Directly in Maker World:
 

These bookmarks feature two significant characters from Demon Slayer: Kimetsu no Yaiba. The first one portrays Sanemi Shinazugawa, the Wind Hashira, known for his fierce personality and powerful wind-based techniques. The second bookmark showcases Obanai Iguro, the Serpent Hashira, who fights with snake-like movements and wields a unique twisted blade.

These are part of a set of eight bookmarks, with more to come, featuring other beloved characters from the series, making it a must-have collection for fans of the anime.

Other Sets:
Zenitsu & Inosuke
Nezuko & Shinobu

Rengoku & Muichiro

For best results use 0.2 nozzle if possible, but 0.4 is also works great (The pictures show a model printed with a 0.4 nozzle)
The design allows for printing with simple color changes at layer, which saves a lot of filament!

USE A LIGHTER! - a quick pass with a torch on the printed parts will get rid of the inevitable stringing that comes with this type of models.
 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA Jayo Black Transmission Distance: 0.3
PLA EryOne Matte RUBY RED Transmission Distance: 1.5
PLA Jayo Matte White Transmission Distance: 4.6
PLA KINGROON Blue Transmission Distance: 2.6
PLA KINGROON Green Transmission Distance: 2.1
Color Pallete:

Swap Instructions:
Obanai:
Start with Black
At layer #5 (0.48mm) swap to RUBY RED
At layer #12 (1.04mm) swap to White
At layer #19 (1.6mm) swap to Blue for the rest.

Sanemi:

Start with Black
At layer #5 (0.48mm) swap to RUBY RED
At layer #12 (1.04mm) swap to White
At layer #19 (1.6mm) swap to Green for the rest.