Bambulab "new" anti vibration feet - Free 3D Print Model

Search models, users, collections, and posts

Remixed by

Mathijs van Wijk

3D Printer>3D Printer Parts

IP Report

Print Profile(3)

All

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 6 walls, 25% infill

Designer

4.4 h

1 plate

4.7(97)

very slow TPU, all 4 in one sequential print

8.1 h

1 plate

4.8(19)

0.2mm layer, 2 walls, 7% infill

1.7 h

1 plate

5.0(15)

Open in Bambu Studio

Boost

283

803

146

1.7 k

1 k

Released

Description

Flexible feet that will minimize the vibrations your printer gives of to its surounding. Perfect for if you have multiple printers on the same table so the vibrations of one printer don't interfear with the print quality of the other printer, given the resonance compensation. Or for if your printer is on your working desk and the vibrations are anoying during your work.

Print instructions:

Print in flexibel material, TPU or TPE.
Print without support.
Advice using ‘sequential’ printing in your slicer to minimize stringing.

Aplication:

Remove the stock feet from your P1 or X1 printer. This might take a little convincing as they are glued on. After what you can place these feet in, can be done both with and without glue, given your preference. All that needs to be done now is redo all the calibration steps of the printer and you will be good to go.