Scott Yu-Jan

cover

Makerworld (model).png

plate_1.png

2024-08-31_dadae1c3cf3ec.png

2024-08-30_d59f3f1cd745b

0.2mm layer, 2 walls, 8% infill

plate_2.png

test part

plate_3.png

mars730

微信圖片_20240908231023.jpg

2024-09-10_56b5164ab7f9d

_(1).2024-09-10_9ae94144d01c1

_(2).2024-09-10_f0c76a7936b6f

Adjusted the print configuration by adding a modifier to reduce infill in certain areas to 3%. Testing showed no impact on functionality or appearance, saving 15% in material and time.&nbsp;Provide test parts to verify if your iPhone is compatible.&nbsp;0.2mm layer, 2 walls, 3~8% infill&nbsp;Adding a chamfer to ensure the camera frame and MagSafe align properly can solve most of the issues.&nbsp;&nbsp;&nbsp;

Case Friendly iPhone 12 to15 & pro

微信圖片_20240908231002.jpg

2024-09-08_b066f22b2ace1

_(1).2024-09-08_92e6c159482e

_(2).2024-09-08_e0d44f84a8db2

Adjusted the print configuration by adding a modifier to reduce infill in certain areas to 3%. Testing showed no impact on functionality or appearance, saving 15% in material and time.&nbsp;Provide test parts to verify if your iPhone is compatible.&nbsp;0.2mm layer, 2 walls, 3~8% infill&nbsp;

Case Friendly iPhone 12 to15 pro Max

ShayneTroxler

IMG_0016.jpeg

IMG_0017.jpeg

IMG_3766.jpeg

2024-09-02_c2096acc4cfcf

The iPhone 14 Pro is slightly bigger than the 15 and would not work in the designers model. Since I'll have the 14 for another year I made some changes in Fusion 360 and as you can see in the video. It look and works great. The chargers used are both 2024 Apple branded for the MagSafe and for the watch charger.&nbsp;<a target="_blank" rel="noopener noreferrer" href="https://youtu.be/RblNO4TfSKM">https://youtu.be/RblNO4TfSKM</a>

For iPhone 14 Pro

jtaeric

IMG_6087.JPEG

iPhone 16 Pro is both wider and longer than designer's model. This modification also leaves 0.75mm gap on left and right side, 1mm gap on top and bottom to help align the phone. As well as reduced bezel by 0.5mm. Test model printed on X1C, please provide feedback on other printer model.&nbsp;

iPhone 16 Pro, 0.2mm layer, 2 walls, 8% infill

IMG_0021.jpeg

Screenshot 2024-09-27 at 7.13.17 AM.png

<a target="_blank" rel="noopener noreferrer" href="https://youtu.be/BJk2UHu0Uo4">https://youtu.be/BJk2UHu0Uo4</a>Since I received the 16 Pro Max, which I keep in a case, I designed a dock that fits based on the 14 Pro I posted. It is pictured with it for size reference. It looks just fine out of the case but is designed for the average case. The print profile has all of the specs, .2, PLA, adaptive cubic (or you can change to gyroid), the single tree support in the back is not necessary but does make the overhang print a cleaner and as it is small and only adds a minute to the print it is worth leaving in place. The “pusher” that ejects the phone is made a tiny bit tighter because I didn't like the sloppy feeling of the first one. It uses standard Apple chargers, USBC only, If you need a watch charger to dedicate to the dock I'd suggest the Laser Brand shown in the photo as it is economical and known to fit. Available at Amazon, Big W (in Australia) and other big box electronic stores.&nbsp;

iPhone 16 Pro Max Case or No Case

mXmiller

rterwtrew.png

14 Pro Max No Case 0.2mm layer, 2 walls, 15% infill

Moose Makes

WhatsApp Image 2024-09-01 at 10.45.44 AM.jpeg

WhatsApp Image 2024-09-01 at 10.45.44 AM (2).jpeg

2024-09-01_81a39b3bec6d9

0.16mm layer height to increase quality.Adaptive layer height for quality corner.Added in tree supports for critical ledge(s).

0.16mm layer, High Quality, adaptive layer height

ROSEE

IMG_0498.jpeg

2024-10-26_a575f2673f789.jpeg

Print profile for iPhone 13 Pro Max for A1 Mini. 0.2mm layer, 2 walls, 8% infill with Body &amp; Clicker on one plate. I successfully printed it for my 12 Pro Max as depth for 13 Pro Max is 0.26 mm more.

iPhone 13 Pro Max | A1 Mini - NO CASE - works for 12 Pro Max

Andy.D.Print

tempImagebJJgqF.jpg

iPhone 15 Pro Max Standby Mode Dock&nbsp;with Tree Auto Support

iPhone 15 Pro Max 0.2mm layer, 2 walls, 8% infill

user_942585646

2.jpg

0.2mm layer, 2 walls, 5% infill

studiostatix

Iphone dock with iphone.png

Iphone dock inside.png

Iphone dock with charger.png

This iPhone 14 dock is a customized remix of Scott Yu-Jan's original design, tailored to fit an iPhone 14 paired with a plastic "Ideal of Sweden" case.To save time and filament, the design includes a test print, allowing you to check if your phone with its case fits properly before committing to printing the full dock. Ideal for tech enthusiasts and makers, this dock combines practicality with a sleek aesthetic, offering a great 3D printing project for iPhone users.

Iphone 14 with Ideal of Sweden plastic case

Apple Silicone Case with MagSafe - iPhone 16 Pro

3DTIMESCULPT

IMG_5278.jpeg

IMG_5269.jpeg

IMG_5273.jpeg

IMG_5277.jpeg

IMG_5279.jpeg

This updated design provides a sleek, functional dock for the iPhone 16 Pro, specially tailored to accommodate the Apple Silicone Case with MagSafe. Perfect for standby mode, this dock ensures a secure fit and efficient alignment for charging.<h3>Key Features:</h3><ul><li>Precise Dimensions: Modified to fit the iPhone 16 Pro with its Apple Silicone Case, ensuring a snug, wobble-free fit.</li><li>Optimized MagSafe Receptacle: Redesigned to hold the MagSafe puck securely, guaranteeing a perfect alignment every time for seamless charging.</li></ul><h3>Printing Recommendations:</h3><ul><li>Material: PLA, PETG, or ABS for durability.</li><li>Layer Height: 0.2mm for a clean finish.</li><li>Walls: 2</li><li>Infill: 8%</li><li>Infill Pattern: Gyroid</li><li>Top Shell Layers: 3</li><li>Bottom Shell Layers: 2</li><li>Infill/Wall Overlap: 10%</li><li>Tree Support: Enabled</li></ul>

iPhone 16 Pro Optimized for Apple Silicone Case with MagSafe

naman

20241126_191543.jpg

iPhone+15+Pro+Standby+Mode+Dock v9.png

0.2mm layer, 3 walls, 3~8% infill&nbsp;This print profile was adapted to fit an iPhone 15 plus with the grip case from dbrand

For Iphone 15 Plus w/ DBrand Grip Case

IMG_9632.jpg

IMG_9634.jpg

IMG_9635.jpg

Screenshot.png

This is a budget-friendly solution that employs an <a target="_blank" rel="noopener noreferrer ugc" href="https://www.amazon.com.au/ESR-Charger-Magnetic-Wireless-Compatible/dp/B0B8CTCQYC/">ESR MagSafe compatible charger</a>. This charger typically retails for less than half the cost of an Apple MagSafe charger, and from my experience has proven to be a reliable performer.&nbsp;This is a variation of the “Case Friendly iPhone 12 to15 Pro Max” profile created by @mars730, and uses a negative part to comply with the ESR dimensions. All other aspects remain unchanged.

Budget Friendly iPhone 12 to15 Pro Max - ESR MagSafe Charger

ThatRandomPerson

IMG_1612.jpg

Designed to work with any type of thin case on the Iphone 14

Iphone 14 w/ thin case

ioio72

iPhone SE Standby Mode Dock.jpg

iPhone SE Gen 2 (2020) and Gen 3 (2022) adaption. Derived from the original profile with the addition of variable layer heights at the top of the sliced model to improve print quality.

iPhone SE Gen2 and variable layer heights at top

rodrigo.vaz

photo_2024-09-06_03-45-54.jpg

Space for a snap4 holder and tighter tolerances

Iphone 15 pro with Snap4 0.2mm layer, 2 walls, 10% infill

moarbian.design

IMG_1960.JPG

IMG_1959.JPG

IMG_1962.JPG

Screenshot 2026-01-28 175127.png

weil das vorherige Modell für iPhone17 mit siliconecase leider nicht passt, habe ich mein eigenes erstellt.&nbsp;Hier die Maße für das siliconecase:lenght: 155mmwidth: 77mmradius: 14mmthickness: 8mm&nbsp;print:0.2mm 7% infill - Gyroidmit support

Because the previous model for iPhone17 with a silicone case unfortunately did not fit, I created my own&nbsp;Here are the dimensions for the silicone case:length: 155mmwidth: 77mmradius: 14mmthickness: 8mm&nbsp;Print settings:0.2mm layer height&nbsp;7% infill - Gyroidwith support

iPhone 17 + offical Silicone Case

Jash

20250317_204233.jpg

20250317_204255.jpg

For the iPhone 14 pro Max perfectly fit and the buttons won&#39;t be accidentally clicked while using. Optimized For Sport Mode

Iphone 14 Pro Max [4.5 Hours On Sport Mode Same Quality]

IMG_0003.JPEG

Screenshot 2025-09-23 171152.png

Iphone 17 pro - 0.16mm layer, 2 walls, 15% infill

Minivansegway

IMG_0133.jpeg

Print details:<ul><li>Printed in eSUN PLA Basic</li><li>Tree supports enabled</li><li>0.2 mm layer height</li><li>15% infill</li></ul>

For iPhone Air no case

Maximilian

IMG_20250328_202150.jpg

IMG_20250328_202206.jpg

Die Druckeinstellungen sind die Selben wie beim Original. Ich habe lediglich die Seitenwände ausgeschnitten, sodass ich mit einem normalen Ladekabel die Docking-Funktion haben kann.

The print settings are identical to the original. I merely cut out the side walls to enable docking functionality using a standard charging cable.

0.16mm layer, 2 walls, 8% infill, With cable charging

16pro

98205D32-5F3B-4DE3-AEA6-C6C99429341C_1_105_c.jpeg

16 Pro Case Friendly 

Iphone 17 pro max

Badger

IMG_0026.jpeg

IMG_2917.jpeg

17 Pro Max 

printjunkee

IMG_0157.jpg

iPhone 15 Pro + Apple Watch Series 8/9

Orbital

WhatsApp Image 2024-10-02 at 14.12.00_5c1e9fb2.jpg

WhatsApp Image 2024-10-02 at 14.11.47_0f77ab7c.jpg

I redesigned this from scratch to fit my s24 ultra with a case and a small magsafe magnet on the back.I changed the back portion to be a pot.&nbsp;I added a usb sloti added little slots for silicone feet &nbsp;

Samsung S24 Ultra Case friendly with magnet space and pot 

Screenshot 2025-07-22 at 15.39.05.png

Christo

IMG_3215.jpeg

IMG_3216.jpeg

Cover Cap to hide the wires for the original model

0.2mm layer, 2 walls, 15% infill

Keivan

DC35CA94-F269-406A-97FB-1C58B7732B93.jpeg

0686821C-5AE8-493D-87C5-7514AC96348F.jpeg

gyroid infill, 0.2mm layer height, 28%, 2 walls - for using with 25w smaller apple official magsafe charger (A3502/A3503)&nbsp;printed using esun pla+ pine green Check TEST SLICE file on my profile

iPhone 17 Pro NO CASE using 25W smaller magsafe

35CAA3E1-262A-4302-BD7C-5F03F31B30CA.jpg

iPhone 15Pro usb-c charging edition (no magsafe)

iPhone 13 pro

Jonathan Kutscher

Foto am 04.09.24 um 23.57.jpg

Designed and tested with iPhone 13 prolighning infill pattern and 0.28lyer height for faster printing&nbsp;manual tree support at one overhang for cleaner printingupdated with correct sized eject button. sorry again!

iphone 15 pro cover stand

clicker + watch

cIPA28

photo_2024-12-30_18-23-03 (2).jpg

photo_2024-12-30_18-23-02.jpg

photo_2024-12-30_18-23-04.jpg

photo_2024-12-30_18-23-05 (2).jpg

0.2 layer2 walls 8% gyroid infill&nbsp;

iphone 15 pro with slim cover+watch 0.2mm layer,8% infill

iPhone 17 Dock

iPhone 17 Clicker

IMG_3702.jpeg

IMG_3703.jpeg

IMG_3704.jpeg

IMG_3705.jpeg

IMG_3706.jpeg

IMG_3707.jpeg

IMG_3708.jpeg

IMG_3709.jpeg

IMG_3710.jpeg

IMG_3966.jpeg

IMG_3970.jpeg

New: Side clearances have been increased by 1 mm on both sides of the phone profile to ensure improved compatibility with silicone cases and easier docking.&nbsp;This updated dock design is precisely adapted for the iPhone 17 paired with the official Apple Silicone Case with MagSafe, providing a stable, clean, and functional charging experience. Ideal for StandBy Mode, your phone sits at the perfect angle for at-a-glance use while staying securely aligned on the MagSafe puck.Key Features:<ul><li>Case-Accurate Fit: Designed specifically around the dimensions of the iPhone 17 with the Apple Silicone Case, offering a snug, rattle-free drop-in fit.</li><li>MagSafe Puck Alignment: The MagSafe receptacle is shaped to hold the charging puck firmly in place, so alignment stays consistent every time you dock your phone.</li><li>StandBy Mode Ready: The viewing angle is tuned for bedside, desk, or kitchen counter use.</li></ul>Printing Recommendations:<ul><li>Material: PLA, PETG, or ABS for durability</li><li>Layer Height: 0.2 mm for a clean finish</li><li>Walls: 2</li><li>Infill: 8%</li><li>Infill Pattern: Gyroid</li><li>Top Shell Layers: 3</li><li>Bottom Shell Layers: 2</li><li>Infill/Wall Overlap: 10%</li><li>Support: Tree Support Enabled</li></ul>

iPhone 17 Silicone Case MagSafe Dock

BODY

TEST SLICE

CLICKER

Ohforf

25-11-21 17-13-13 0426.jpg

25-11-21 17-15-50 3487 cropped.jpg

This was created using @chaoswrangler master file: <a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/de/models/617129-all-iphones-11-16-new-custom-file-scottyujan#profileId-556745">https://makerworld.com/models/617129-all-iphones-11-16-new-custom-file-scottyujan#profileId-556745</a>&nbsp;Works with the iPhone 17 Pro and the Tech Woven case, will probable work for the Silicone Case as well.&nbsp;The Apple Watch charger displayed can be downloaded here: <a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/models/841848-snap-on-apple-watch-charger-iphone-standby-dock#profileId-788213">https://makerworld.com/models/841848-snap-on-apple-watch-charger-iphone-standby-dock#profileId-788213</a>&nbsp;

iPhone 17 Pro - Tech Woven case

Made By Mark

IMG_4130.jpeg

IMG_4215.jpeg

IMG_4128.jpeg

IMG_4145.jpeg

IMG_4178.jpeg

IMG_4192.jpeg

This profile is made for a 2nd or 3rd generation iPhone SE, or any phone with maximum dimensions of 143 x 73 x 10mm (W x H x D).

For iPhone SE 2/3 with a case.

visokoo

PXL_20251231_083311517.jpg

This print profile is for a Google Pixel 9 or 10 with a case. Supports the pro version as well.&nbsp;An additional wider cutout was made on the bottom to support adding another magsafe puck so that you can charge your pixel buds. The 3rd place is a test print to check the fit of your phone + case.

Pixel 9/10 w/ case and support for pixel buds

This was designed for the iPhone 15 Pro in collaboration with OVERWERK. Watch the project video for details:<figure class="media"><oembed url="https://youtu.be/L3nWw8qSYgk"></oembed></figure>&nbsp;This 3D model is not for commercial use. If you don&#39;t have a 3D printer, pre-order is available here: <a target="_blank" href="https://store.overwerk.com/products/dock" rel="nofollow noopener">https://store.overwerk.com/products/dock</a>&nbsp;DISCLAIMER: Please be careful when ejecting your iPhone. Always have your thumb down or other fingers in the way ready to catch it as demonstrated in the video.&nbsp;SEE THE VIDEO DESCRIPTION ON YOUTUBE FOR THE EXACT MATERIALS AND TOOLS USED.

iPhone Standby Mode Dock (designed with OVERWERK)

Print Profile(38)

Bill of Materials

Description

Comment & Rating (3893)

License

Remixes (244)

Related Models