Search models, users, collections, and posts
Anker KVM Switch monitor arm pole clamp
IP Report
Print Profile(1)
0.2mm layer, 2 walls, 15% infill
Designer
1.9 h
1 plate
Open in Bambu Studio
Boost
49
184
5
1
145
53
Released
Bill of Materials
List other parts
- Bolt M5 x 20mm x 4: It does not matter if it is somewhat short.
- Nuts M5 x 4:
- Screws M2.5 x 5mm x 2:
Description
This model attaches the Anker KVM Switch to the monitor arm pole.
It is designed for poles with a diameter of approximately 35 mm.
For assembly, you will need:
- 4 M5 x 20mm bolts
- 4 M5 nuts
- 2 M2.5 x 5mm screws
The user assumes all responsibility for the use of this model.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (5)