Palomar Hale Telescope and Dome Optimized

海尔望远镜和圆顶优化版
Palomar Hale Telescope and Dome Optimized

本模型是以下模型的二创，更多信息请查看原作
This is a remix of the following model. For more information, see the original model.
https://www.thingiverse.com/thing:2235120
https://www.thingiverse.com/thing:4793742
https://makerworld.com/zh/models/65529

• X1C可直接打印
  X1C can print directly

   

• 所有零件分为0.08毫米层高和0.2毫米层高两部分打印
  All parts are printed in two configurations: 0.08mm layer and 0.2mm layer

   

• 调整一些零件的公差
  Adjust tolerances on some parts

   

• 部分零件启用支撑
  Enable supports for some parts

   

• 盘1 / Plate 1
  可变层高
  Variable Layer Height

   

• 盘2 / Plate 2
  可变层高
  Variable Layer Height
  合并Palomar_dome_v1.stl和Palomar_dome_outer_ring.stl
  Merge Palomar_dome_v1.stl and Palomar_dome_outer_ring.stl

   

• 盘3 / Plate 3
  Palomar Telescope Magnet holder.stl
  用于安装望远镜磁铁
  Magnets for mounting telescope

  

   

• 盘3 / Plate 3
  Palomar Telescope Floor.stl
  如果单独打印望远镜则可以打印这个底座
  If you print the telescope separately, you can print this base

  

   

• 盘6 / Plate 6
  Palomar_telescope_floor.stl 增加赤道仪定位孔
  Palomar_telescope_floor.stl adds equatorial mount positioning hole

   

• 盘8 / Plate 8
  Palomar_dome_building_outer_ring_half.stl 尺寸过大，无法打印，切分成两份
  Palomar_dome_building_outer_ring_half.stl size is too large to print, cut into two

  

   

• 盘9 / Plate 9
  增加望远镜组装工具
  Added telescope assembly tool

  

   

• 盘9 / Plate 9
  增加圆顶外侧栏杆组装工具
  Added dome outer railing assembly tool
  抱歉此处我未拍照，安装Palomar_dome_building_outer_ring_half.stl时将组装工具靠在Palomar_dome_building_v1.stl上以便定位
  Sorry I didn't take a picture here. When installing Palomar_dome_building_outer_ring_half.stl, place the assembly tool against Palomar_dome_building_v1.stl for easy positioning.