Cyber Tank - Working Tracks and Lights
Print Profile(2)
Bill of Materials
Description
Boost Me (for free)
Thanks for your Support! Boost Help Greatly!
This is a Cyber Truck inspired Tank
It moves on battery power with speed adjustment and working headlight using Maker parts from Bambu Maker hardware kits.
All printed parts print easily with very little supports.
The Print profiles have been thoroughly tested and fine tuned with PLA ONLY. Any other Filament type may not work due to the tight tolerances needed.
Flillments Brands tested. - Bambu, Numaker, Sunlu, Esun, BBlife, and Kingroon
Do not recommend matte or flat filament for any of the moving parts.
Any print profile not by the designer will likely have trouble.
NOTE I made this with the 150rpm motor, there is a 400rpm and 1000rpm that fits the model as well. More Rpms is more speed but less torque.
Bambu Maker parts list and Assembly Guide down below
Boost Me (for free)
This Model took well over 120 hours of Design work not counting print time and the rolls of filament used for testing. I loved every second of it and I hope many people get the joy I do from the final model. All that Said Boost Help a lot to allows me to do these Models. Thanks! more to come.
_________________________________________________________________________________________
I enjoying Making Models to share!
Boost and Memberships Help Greatly to be able to spend the time and filament it takes to test these prints to perfection.
THANKS FOR YOUR SUPPORT!
Membership
Hope My work bring you some success!
Documentation (1)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (25)