Guild Wars 1 - Map of Tyria (Hueforge)

For some time now, I've been into the mood of going back to Guild Wars 1, and I wanted to have some fancy map of Tyria, so after several tries, I think I've come to something pleasing for me.

I came with 3 hueforge projects, but you can use the map alone if needed. I could have put the compass directly onto the map, but as I wanted more control, I made another small Hueforge. You just needed to be accurate when gluing especially the ‘N’.

Here are the instructions for the map (expect a big slicing time, despite the simplified version):

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x225.39mm in size
You may print at higher layer heights below the Min Depth of 0.24mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
PLA+ eSun Blue Pro Transmission Distance: 1.9
PLA+ eSun Black Transmission Distance: 0.3
PLA+ Esun Brown Transmission Distance: 1.5
PLA+ eSun Gold Transmission Distance: 5.3
PLA+ eSun White Bone Beige Transmission Distance: 5
PLA PolyLite White Transmission Distance: 5
This print uses 6 unique filaments

Swap Instructions:
Start with Blue Pro
At layer #4 (0.4mm) swap to Black
At layer #6 (0.56mm) swap to Brown
At layer #9 (0.8mm) swap to Gold
At layer #11 (0.96mm) swap to White Bone Beige

Border Only Colors from here until the end.
At layer #23 (1.92mm) swap to White for the rest.

For the Guild Wars logo (keep in mind if you change filament colors, keep the same color for the support and the base of the logo, unless you want something custom):

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 80x22.74mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
    PLA+ Esun Bone White Transmission Distance: 5.7
    PLA+ eSun Black Transmission Distance: 0.3
    PLA+ eSun Red Transmission Distance: 3.5
    PLA+ Esun Orange Transmission Distance: 5
    PLA+ eSun Yellow Transmission Distance: 9.4
    PLA PolyLite White Transmission Distance: 5
This print uses 6 unique filaments

Swap Instructions:
    Start with Bone White
    At layer #6 (0.56mm) swap to Black
    At layer #7 (0.64mm) swap to Red
    At layer #11 (0.96mm) swap to Orange
    At layer #16 (1.36mm) swap to Yellow
    At layer #24 (2mm) swap to White for the rest.

And the compass:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 25.747x31.545mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 3.4mm and the Actual Depth is 2.5mm

Filaments Used:
PLA+ eSun Black Transmission Distance: 0.3
PLA+ Esun Brown Transmission Distance: 1.5
PLA+ eSun Gold Transmission Distance: 5.3
PLA+ Esun Bone White Transmission Distance: 5.7
PLA+ eSun White Transmission Distance: 4.6
This print uses 5 unique filaments

Swap Instructions:
Start with Black
At layer #3 (0.32mm) swap to Brown
At layer #5 (0.48mm) swap to Gold
At layer #17 (1.44mm) swap to Bone White
At layer #31 (2.56mm) swap to White for the rest.