Business Card Box // Visitenkartenbox 85x55 - Free 3D Print Model

Search models, users, collections, and posts

DocLex

Household>Office

IP Report

GIF

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.16mm layer, 4 walls, 25% infill

Designer

2.8 h

2 plates

4.7(198)

0.16mm layer, 2 walls, 15% infill

3.9 h

2 plates

4.3(33)

Open in Bambu Studio

Boost

739

1999

252

4.3 k

2.8 k

Released

Bill of Materials

Bambu Filaments

Select all

Black (31100) / Filament with spool / 1 kg

PETG-CF

Description

English version below (machine translated)

Dispenser für ca 12 Visitenkarte (85x55mm), je nach Dicke des Papier. Andere Grössen auf Anfrage. Wenn die Karten aneinander kleben kann das verbesserte Design helfen.

Ein-Teil-Druck. Kein Zusammenbau, kein Support.

Gedruckt mit Bambu Lab PETG-CF, standard Einstellungen. Sieht echt spitze aus. Aber auch andere Materialien sind möglich. (Layerhaftung muss OK sein).

Dispenser for approx. 12 business cards (85x55mm), depending on the thickness of the paper. Other sizes on request. If the cards stick together, the improved design can help.

One-piece printing. No assembly, no support.

Printed with Bambu Lab PETG-CF, standard settings. Looks really great. But other materials are also possible. (Layer adhesion must be OK).

For 91x55 cards:

https://makerworld.com/en/models/249875#profileId-266151

Comment & Rating (252)

@user_2307379702

Print Profile

0.16mm layer, 4 walls, 25% infill

looks good. although out of 4 prints one one stayed standing to the end. should have a better base or some side support to be able to make the top layer. all 3 failed on the final fill.

@me_Cyber77gds

Print Profile

0.16mm layer, 4 walls, 25% infill

This is a handy item, I printed this out of PLA and double sided taped it to the inside of my clip board lid. Only holds 10 of my cards but I think they are thicker than the average biz cards. Thanks for the print profile.

@Tecca3D

Print Profile

0.16mm layer, 2 walls, 15% infill

molto comodo

@Lenze18

Print Profile

0.16mm layer, 4 walls, 25% infill

Good Job!

@pat_riot

Print Profile

0.16mm layer, 4 walls, 25% infill

I tried both versions, but the one for sticky cards has a notch, that made it impossible to get the last card out of the box. With the other version, I didn't have this issue. Nice design, easy print, but quite big for the amoznt of cards, that can be stored. I printed it in Bambu PETG-HF

@Dreo2019

Print Profile

0.16mm layer, 4 walls, 25% infill

muito bom

@mircooo_schweiz

Print Profile

0.16mm layer, 2 walls, 15% infill

Really good. I made one myself, but the slot was too small. Now I didn't feel like it anymore and got this one that works directly. And it holds a lot 👍

Show original

@eca90

Print Profile

0.16mm layer, 4 walls, 25% infill

Great print! I could have added an adaptive layer height to further improve the top finish, but that's nitpicking. 🙂

Show original

@Madox.Works

Print Profile

0.16mm layer, 4 walls, 25% infill

The case looks nice but it's almost impossible to get the business cards out of the box (I tried both versions). I printed the box with the A1 and Bambu's PETG-CF black. SInce the nozzle clogged twice, I tuned the standard Bambu PETG-CF as following: - retraction length: 0.6mm, - Retraction speed: 22mm/s - wipe while retracting: on - long rectraction when cut: off The process parameters need tuning as well, with these parameters I printed a very nice box: outer wall 45 mm/s inner wall 60 mm/s infill max 80 mm/s Travel 200 mm/s Hope it helps.

@zeoarchon

Print Profile

0.16mm layer, 4 walls, 25% infill

Print adheres well to the bed and looks clean Printed with SUNLU PETG in grey Slight layer shift at the start of the print due to my settings as I only recently got the Sunlu PETG

Show original

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Jeep Kit Card

agepbiz

71.2 k

22.1 k

Cascade card wallet V2

Hugo

53.6 k

14 k

Business Card Box / Visitenkartenbox

mrsretronintendo

7.5 k

1.1 k

T-Rex Skeleton Kit Card

Fletch

42.5 k

15.2 k