PAX 3 - Mini Funnel, Scoop, & Tamper Kit

This is a small kit with everything needed to enjoy your Pax vaporizer on the go; a small scoop, tamper, and funnel held in the oven and it's holder base with 3x2mm magnets. There is an additional model which contains an embedded magnet for convenient placement.

I really like the fantastic model that @Gabe_233641 posted, just did not want to have to grab an additional tool to get the job done.

Included are files for the magnet version of the entire kit as well as just the tamper/scoop for those (like me) that have already printed the original. Print as positioned, no support required, magnets might need a little glue depending on the filament chosen.

Check the polarization of the funnel magnets against your Pax unit before gluing! If you insert the magnets the wrong way the funnel will be pushed out of the oven instead of keeping it attached.

This tool works great with the magnetic vaporizer grinder tray found here.

Link to the magnets I used for this project:

• 3x2mm Magnets This size is not currently offered in Maker Supply but I linked the 3x1mm, you could always stack 2 together if you have a gift card you'd like to use there. It will probably be difficult using 2 magnets in each of the holes found inside the tray so I would go with the 3x2 single if possible.
• 10x3mm Magnets They came packaged nicely and out of 3 purchases none have been broken. This size is also available in Maker Supply.