Haunted Mansion Welcome Foolish Mortal Magnet

I saw the model and had to print for my refrigerator. I think I will be gifting several of these, thanks @Divemaster_590865 for the repost.

Once I scaled the model down, of course the existing holes for magnets shrank as well. I decided I still wanted to use 10mm magnets but felt I only needed 2 for the size and use case. I filled the magnet holes I didn't require and enlarged the 2 remaining. Normally I embed all magnets in my prints however, already had to increase the z height based on the depth of the flat (purple) back and didn't think it would look right if I increased enough to cover so I left them exposed as the original remix.

Color can be changed based on height (the included 3mf file is painted by layer). Finished print size as posted in 3.5"x4.5" (approx 89mm x 114mm).

I didn't have the right shade of purple for the authentic Disney look but think the Flashforge Purple Nebula added a nice flair. The black is Overture Matte PLA.

Link to the magnets I used for this project = 10mm Magnets which can also be found in Maker Supply, linked below.