Over the door Hat - Coat Hanger 2 Hooks - Free 3D Print Model

Search models, users, collections, and posts

Sage Prints and Design

Household>Other House Models

IP Report

Print Profile(2)

All

P1S

X1E

A1 mini

H2C

H2S

H2D Pro

P2S

X1 Carbon

P1P

H2D

X2D

A2L

0.24mm layer, 4 walls, 10% infill

Designer

36 min

1 plate

4.8(181)

stronger, various lengths, 0.2mm layer, 4 walls, 10% infill

45 min

1 plate

5.0(15)

Open in Bambu Studio

Boost

362

939

219

107

3.5 k

2.4 k

Released

Description

A over the door coat / jacket / hat hanger with 2 hooks. We utilize them to hang both coats and hats. It will fit a max door thickness of 1-3/8" or 35 mm.

Hooks with gap

1 hook with 10 mm gap Hook Holder 1 hook with 10 mm gap

1 hook with 20 mm gap Hook Holder 1 hook with 20 mm gap

1 hook with 30 mm gap Hook Holder 1 hook with 30 mm gap

Hooks for over a door.

Link to 1 hook model Hat / Coat Hanger 1 Hook

Link to 2 hook model Hat - Coat Hanger 2 Hooks

Link to 3 hook model Hat - Coat Hanger 3 Hooks

Link to 4 hook model Hat - Coat Hanger 4 Hooks

Link to 5 hook model Hat - Coat Hanger 5 Hooks

Boost Me (for free)

Appreciate each and every boost as it helps me to replace filament and printer parts to keep creating models for upload to MW.

=======================================================================

You can also support me on Patreon and also to obtain permission for commercial use:

https://www.patreon.com/sageprintsanddesign

Comment & Rating (219)

@jemowski

Boosted

Print Profile

0.24mm layer, 4 walls, 10% infill

made some mods (profile uploaded) according to my needs :) great model as always!

@SanThali

Could you do that 250mm long? I need the hooks a lot lower for my small wife.

@trellzbellz

Boosted

Print Profile

0.24mm layer, 4 walls, 10% infill

Had some issues with adhesion to build plate. Once recleaned plate it did stay in place but looks as if it may have had some issues on the plate as there is just a slight misalignment/shelf to one side. Still 100% functional and very good spacing for hanging hats. Study when on door

The profile uploader has replied

@sage117

Thank you for the boost. Yeah, that is a bit weird where you have a shift but only on one hook. Was that the downward side on plate? If so, it might have lost adhesion. Not sure if you have tried BIQU or SuperTack plates but zero issues on those ones with sticking and if nothing the ST is almost too strong of bond.

@trellzbellz

Boosted

I am not sure which side it was. We are very new to this and starting with just the basic a1 mini and textured plate. Added a little glue and never had any issues, have printed at least 6 more!

@user_828050389

Print Profile

0.24mm layer, 4 walls, 10% infill

just what I needed!

@filofabbricante

Print Profile

stronger, various lengths, 0.2mm layer, 4 walls, 10% infill

Simply perfect and functional Thank you 😊

Show original

@Lambush

Boosted

Print Profile

0.24mm layer, 4 walls, 10% infill

Strong and has perfect tolerances for the door!

The profile uploader has replied

@sage117

Thank you for the boost, rating and printed pic. Yeah a couple people have complained about the thinness of back part of hook but at least for my doors it was right at tolerance needed to be able to close the door and have it latch without issue.

@Tyfly39

Print Profile

0.24mm layer, 4 walls, 10% infill

came out perfect been using them for about a month no problems with strength

@smh12687

Boosted

Print Profile

0.24mm layer, 4 walls, 10% infill

works great. thought about it before leaving for work printed and hung coat up once at work. Thank you!

The profile uploader has replied

@sage117

Thank you for the rating, boost, and pic.

@ME3DUK

Print Profile

0.24mm layer, 4 walls, 10% infill

Perfect print. Great design, thanks!

@RobotSamurai

A great print so far. It seems quite strong too.

(Edited)

@user_1151502267

Another great print

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.